astig bro macmon! especially the bat logo
Thanks sir appreciate the appreciation
@raptor
Yes I agree, My option is either lower the screen instead of elevating the seats. Actually it will be a double setup. Plasma with manual screen for the projector. The reason for the TV is that if the viewing will be from the outside, I will just turn the tv facing outside for outside party watching. But if full home cinema viewing, then the Projector/screen duo. If need to elevate the seat then that will be the next project.
@audiojunkie/practikal
Try ko ma scan layout since having problem with my scanner. But to give an eyeview. My HT area is actually not symmetric in terms of walls. The front wall is wider with the Right wall (if facing the front wall) becoming smaller due to the Property line. It is around 16 feet long (front to back). With window (to be covered) in front and a small windows (to be covered) also at the back plus the aircon. TV and Projector will be used with the PJ attached to the ceiling. BTW my ceiling is again asymmetric meaning the roof is slanted wherein the lower portion is on the left and the higher portion is on the right(facing the front wall) This is due to the drainage system. Will be using a 7.1 system.
@audiojunkie/dodie
Reason for the makapal cement is due to the "klive" of the roofdeck. This is at the back portion and the slope is form the back going to the front. Thus the thicker cement. I also agree with the future proofing. Hopefully it will be enough.
Will keep this updated. Thanks for all your inputs and suggestions and comments. Appreciate it very much.