Author Topic: LED 86C HTP Projector (Read 75215 times)

robot.sonic · « **Reply #180 on:** Jun 21, 2015 at 02:43 PM »

Pwede ba to sa bright room? Isuggest ko sana sa school na ito na lang gamitin na projector.

LouPah · « **Reply #181 on:** Jun 22, 2015 at 08:41 AM »

Pwede! but always remember all led projectors are suffering to any bright environment. In your case, I think you should use a higher lumens bulb projector.

megalomania · « **Reply #182 on:** Jun 24, 2015 at 11:51 AM »

After 10 years, finally got my projector! =)

espionage · « **Reply #183 on:** Jun 24, 2015 at 12:36 PM »

Congrats! Picture, picture

LouPah · « **Reply #184 on:** Jun 24, 2015 at 05:11 PM »

Quote from: megalomania on Jun 24, 2015 at 11:51 AM

After 10 years, finally got my projector! =)

Yes, please share your thoughts and observation with your CRE X1500 projector sir.
Paki-share din ng mga pics.

megalomania · « **Reply #185 on:** Jun 24, 2015 at 08:38 PM »

Kinakapa ko pa settings ng cre. Hirap makita optimal setting e. =)
Tried to do some movies, Ok naman. Pero tama si sir Loupah, if coming from a 1080p tv, don't expect too much.
Its the size that makes this pj sulit.

Although may konti problema, may parang static na dumi sa middle right area. I do not know if sa loob ng projector.
Other than that, I think I will be enjoying this once I have done the proper calibration. =)

LouPah · « **Reply #186 on:** Jun 24, 2015 at 10:06 PM »

Nagkaproblema ba shipment mo sir at medyo natagalan?
Yes, when it comes to a projector it really matter the size of the image, compared to a 1080p tv.
I don't know if parehas yan sa Cre x205 ko, you can access the factory settings by pressing 1234 from the remote control, para maximize mo ung settings.

sherwinlou · « **Reply #187 on:** Jun 25, 2015 at 09:46 PM »

Yun bang led86 nagin paano ma maximize ang quality ng picture? At ngayon ko lang nadiskubre na yung unit ko hindi pala 3d.kc wala ako makita sa remote na 3d or sa manual.

megalomania · « **Reply #188 on:** Jun 25, 2015 at 10:17 PM »

Quote from: LouPah on Jun 24, 2015 at 10:06 PM

Nagkaproblema ba shipment mo sir at medyo natagalan?
Yes, when it comes to a projector it really matter the size of the image, compared to a 1080p tv.
I don't know if parehas yan sa Cre x205 ko, you can access the factory settings by pressing 1234 from the remote control, para maximize mo ung settings.

Natagalan sa customs e. Mga 2 weeks ata siya dun. Pero when it arrived sa post office. Tama lang naman ang collected tax. Bale I paid 895 for customs including fee sa ems.

megalomania · « **Reply #189 on:** Jun 25, 2015 at 10:23 PM »

Timpla timpla lang sir dun sa settings tab: brightness, contrast, color, etc.

Try mo din magsearch online baka may available settings na puwede maitry for led86.

megalomania · « **Reply #190 on:** Jun 25, 2015 at 11:03 PM »

Some trial pics:

sherwinlou · « **Reply #191 on:** Jun 26, 2015 at 03:50 PM »

Ok ang pq nyan sir ah.

megalomania · « **Reply #192 on:** Jun 26, 2015 at 05:28 PM »

Quote from: kontador on Jun 17, 2015 at 01:33 PM

yes this my projector from the start may dot na projected sa screen
i thought na madumi lang yung screen then nung nilapitan ko sa loob pala ng projector
i tried to ask sa seller from alibaba for advice but no response so i decided to open the top
cover then i found out na may dumi sa front lcd cotton buds lang ang katapat.

Sakin sir may dumi din, pag hindi pa din natanggal try ko din iopen.

Sinuggest ng seller is parang "pagpag" style. =)
Baka may dumi lang nga daw na nakapasok upon shipment.

kontador · « **Reply #193 on:** Jun 30, 2015 at 01:43 PM »

Quote from: megalomania on Jun 26, 2015 at 05:28 PM

Sakin sir may dumi din, pag hindi pa din natanggal try ko din iopen.

Sinuggest ng seller is parang "pagpag" style. =)
Baka may dumi lang nga daw na nakapasok upon shipment.

hindi kaya nang pagpag yan at baka may mag loose pa sa loob

open mo na lang sir.

qguy · « **Reply #194 on:** Jul 06, 2015 at 06:57 PM »

Anyone in the taguig / paranaque area that has this projector and if pwede pasilip ?

thanks

sherwinlou · « **Reply #195 on:** Jul 07, 2015 at 12:08 AM »

sa akin pede pasilip cubao area :-)

LouPah · « **Reply #196 on:** Jul 07, 2015 at 07:46 AM »

Quote from: megalomania on Jun 25, 2015 at 11:03 PM

Some trial pics:

Great pictures, congratz...Anu sir nakapa mo na ba ang factory settings ng pj mo, by just clicking 1234 on the remote control?

megalomania · « **Reply #197 on:** Jul 08, 2015 at 11:50 AM »

^Hindi ko pa natry ung 1234 sir. Medyo natuwa na ko sa picture so nanonood na lang muna. Haha!

Kaso hindi ko pa naaalis ung dirt, hindi ako makakita ng tool to open my pj, maliit kasi ung screws.
Pero overall oks na ung setting na nagawa ko, hindi pa ulet ako nagtry magtweak.

Problem na lang is placement, hindi ko pa naikakabit permanently sa ceiling, Temporary stand lang muna pag nanonood (patong-patong na box). =)

LouPah · « **Reply #198 on:** Jul 08, 2015 at 01:57 PM »

Pansin ko nga malaki ang improvements ng picture quality ng projector mo from their previous model, or maybe coz its different model from mine.

megalomania · « **Reply #199 on:** Jul 08, 2015 at 02:35 PM »

Medyo grainy nga lang pero for the price pwede na.
Though mas crisp ata si Led86 basing from the pics.

Pansin ko lang medyo mainit ang singaw ng projector. Sa Led86 ba ganun din?

LouPah · « **Reply #200 on:** Jul 08, 2015 at 03:09 PM »

Quote from: megalomania on Jul 08, 2015 at 02:35 PM

Pansin ko lang medyo mainit ang singaw ng projector. Sa Led86 ba ganun din?

Nope! As in walang kainit-init sa singaw, maybe for its huge casing & good cooling mechanism inside, but with my Cre X205 medyo mainit rin ang singaw as I recalled, pero I think it is all normal.

megalomania · « **Reply #201 on:** Jul 08, 2015 at 03:19 PM »

I see. Buti na lang malamig ngayon. Hehe.

LouPah · « **Reply #202 on:** Jul 08, 2015 at 03:34 PM »

Yes, maganda mag movie marathon ngayon mababa ang consumo ng kuryente dahil minus the aircon kc nga malamig

sherwinlou · « **Reply #203 on:** Jul 09, 2015 at 10:53 AM »

yung led86+ ko mainit ang singaw na nilalabas sa right side nya. bat ganun,pero so far yung unit itself hindi naman umiinit yung singaw lang galling sa loob.but still satisfied ako sa resulta,ganun din sa akin di pa naka mount so patong muna at least tulad ngayon nilipat naming sa kwarto kaya yung anak ko tuwang tuwa sa kwarto nanuuod.

sherwinlou · « **Reply #204 on:** Jul 09, 2015 at 10:55 AM »

Quote from: LouPah on Jul 07, 2015 at 07:46 AM

Great pictures, congratz...Anu sir nakapa mo na ba ang factory settings ng pj mo, by just clicking 1234 on the remote control?

ito bang led86+ sir ganun din may 1234 settings din :-)

megalomania · « **Reply #205 on:** Jul 09, 2015 at 12:02 PM »

^Baka meron din yan sir. Mine is a cre x1500.
Hirap lang pag manual ung focus at hindi pa nakamount, laging iaadjust kapag gagamitin. Hehe.

LouPah · « **Reply #206 on:** Jul 09, 2015 at 12:28 PM »

Quote from: sherwinlou on Jul 09, 2015 at 10:55 AM

ito bang led86+ sir ganun din may 1234 settings din :-)

Walang ganyan sa atin sir, magkaiba ang motherboard and settings nila, so just for CRE projector brand only.

LouPah · « **Reply #207 on:** Jul 09, 2015 at 12:41 PM »

Quote from: sherwinlou on Jul 09, 2015 at 10:53 AM

yung led86+ ko mainit ang singaw na nilalabas sa right side nya. bat ganun,pero so far yung unit itself hindi naman umiinit yung singaw lang galling sa loob.

Yung init na lumalabas galing sa loob ng projector ay normal lang yon, basta wag lang masyadong mainit. The projector is keep maintaining to its normal temperature inside, kaya nya nilalabas ang init. But my Led 86 never got that hotter than my previous Cre X205 projector.

qguy · « **Reply #208 on:** Jul 10, 2015 at 08:11 PM »

so ano mas maganda yung CDR king or this one ?

LouPah · « **Reply #209 on:** Jul 11, 2015 at 11:34 AM »

Parehas na maganda for its price!

I don't have that Cdr-king's RD-806 to compare it, but the picture quality maybe thesame, magkakaiba lang ng casing and other features. Speaking of...The best features for Led 86 that I liked most so far is the automatic shutoff function when the projector can't detect any source. Walang ganito sa una kong projector.