Hi all,
I hope you guys have time for a newbie's question.
I would just like to ask if you guys know of a gadget I can connect between my A/V receiver and my speakers to reduce noise/humming/static. I've already found that the defect is with my receiver and would just like to know if there's still a way to remedy this problem other than buying a new one (amp) and throwing out this junk.
Thanks in advance for your help.
if i were you this is how i would proceed!
1. remove all input rca cables. leave the speaker connections as it is.
2. set input selector to cd, main volume control to zero, then power up.
3. if humming is present even with volume control set to minimum, then it could be your avr, have it repaired, if however the humming/static seems to go away, then proceed to next step.
4. turn the vulume control from minimum til 3'oclock, then back, is humming present? any crackling sounds? if so then have your avr repaired.
5. if after doing #4 and no humming was heard, reconnect the input rca cables one by one, then do #4, chances are you may have a defective cable.
good luck!