Hi raptor. PLDT DSL user here too. the internet accessibility is working naman. naka static ba IP add ng etrayz mo?
Yes sir on static IP ... i'll probably have to reset everything again ... i'll be adding a hard disk anyway and may have to reset everything - i originally have it set for RAID1, and setting it to RAID0 would require reformat - good thing that the contents i have in my eTrayz are only duplicates.
Sir, can you please share your setup, just in case i cannot get it working ... in my case i'm using a Linksys WRT150N router ... IP address of my router is 10.10.10.1, and the static IP address of my eTrayz is 10.10.10.103 (wired connection) ...tried both DMZ and port forwarding, no success so far...i must admit that my initial setup using the wizard was quite messy as I had to do some retries after my initial mail test did not work ... my PLDT DSL modem's IP is 192.168.1.1 (i'm able to access this, but there's very little settings to change).
I have a Globe Tattoo which I use to test connection, but no success ... it's on the forums that it is not possible to connect from the internal network using the DDNS, but I tried it anyway - result was I'm directed to the web interface of the PLDT DSL modem when trying to reach it from inside network.
TIA