Author Topic: Mede8er MED500X2 (Read 17801 times)

j0n · « **Reply #30 on:** Oct 24, 2011 at 10:40 AM »

may nakapagtry na ba ng internal 3tb dito? specifically WD30EZRX model? 6.8k nalang sya eh, balak ko ilagay kay MED500X2.

toys4geeks · « **Reply #31 on:** Oct 24, 2011 at 11:09 AM »

Quote from: j0n on Oct 24, 2011 at 10:40 AM

may nakapagtry na ba ng internal 3tb dito? specifically WD30EZRX model? 6.8k nalang sya eh, balak ko ilagay kay MED500X2.

all NMT 1185 supports 3TB, pero there are some who CANNOT SUPPORT SATA III. so be careful.

best way to test before buying is to get the 3TB get full to the brim, and plug to your NMT.

HTH

connosieur · « **Reply #32 on:** Oct 24, 2011 at 11:11 AM »

Is this better than Popcorn Hour A-300? What are the differences?

toys4geeks · « **Reply #33 on:** Oct 24, 2011 at 11:14 AM »

Quote from: connosieur on Oct 24, 2011 at 11:11 AM

Is this better than Popcorn Hour A-300? What are the differences?

Realtek 1185 is MED500X2 while the popular predecessor -- MED500 is 1073
1185 is 20% faster(chip), 20% cooler(chip).
from what i gather medjo bagal pa yung new interface ni 500X2 over MED500 so its not the chip that's causing it. Firmware lang yan so expect the UI to improve and mature over time.

Sigma of A300 is likewise 20% faster (chip), but I dont think its any cooler as sigma 86xx are known workhorse.

Conan · « **Reply #34 on:** Oct 24, 2011 at 04:57 PM »

Quote from: gienr on Oct 24, 2011 at 06:22 AM

Bro, what do you mean by "Deal has ended and then you say Deal is on"? Maybe yugadeals.com will raise by a thousand the price after the first set of units sold at 6thou. sana maging 6.5thou man lang

Deal has ended means it is finished. Deal is on means it met the required minimum purchase for the deal to push through.

j0n · « **Reply #35 on:** Oct 25, 2011 at 04:03 PM »

Quote from: toys4geeks on Oct 24, 2011 at 11:09 AM

all NMT 1185 supports 3TB, pero there are some who CANNOT SUPPORT SATA III. so be careful.

best way to test before buying is to get the 3TB get full to the brim, and plug to your NMT.

HTH

Thanks sir for the info. Sa tpc ko lang nakita yung 3TB eh, di ko lang sigurado kung pwede itest. For med500x2 users, may nakapagtry na ba ng 3TB?

Conan · « **Reply #36 on:** Oct 28, 2011 at 03:39 PM »

Quote from: musika on Oct 28, 2011 at 03:27 PM

Good day,

I'm selling mede8er MED500X2 P7,900 unit only.

Thanks

This thread is for discussion only not selling. Please post in the Marketplace.

CMac · « **Reply #37 on:** Oct 29, 2011 at 12:23 AM »

@conan

give him a break brother. the other guy has it worse by doing the sneaky marketing tactic and no one seems to care.

musika · « **Reply #38 on:** Oct 29, 2011 at 08:47 AM »

ah sorry my mistake, just want to share its pricing right now for reference. thats why im not posting my number or asking to pm me.

cheers,

lncc63 · « **Reply #39 on:** Nov 20, 2011 at 10:54 AM »

Version 2 of the firmware is out! Upgrading went smoothly. UI seems more responsive though there are a few caveats.

j0n · « **Reply #40 on:** Nov 20, 2011 at 04:06 PM »

To Med500X2 users, pano ba gamitin yung favourites? I have movies from different HDDs and is it possible to have a single view for all movies? Hindi yung seperate paren per drives.

Eddie · « **Reply #41 on:** Nov 24, 2011 at 05:10 PM »

Quote from: lncc63 on Nov 20, 2011 at 10:54 AM

Version 2 of the firmware is out! Upgrading went smoothly. UI seems more responsive though there are a few caveats.

Also there's a 2.0.1 out just a day or two.

Eddie · « **Reply #42 on:** Nov 24, 2011 at 05:12 PM »

Quote from: j0n on Nov 20, 2011 at 04:06 PM

To Med500X2 users, pano ba gamitin yung favourites? I have movies from different HDDs and is it possible to have a single view for all movies? Hindi yung seperate paren per drives.

I think you will end up with two separate favourite folders with your scenario. A new manual is out too. http://www.mede8er.com/images/USER_INSTRUCTIONS/Mede8er_med500x2_user_rev5.0.6_21Nov2011.pdf

iiinas · « **Reply #43 on:** Nov 30, 2011 at 07:32 AM »

here are some unboxing photos...

IMG_1404 by iiinasky, on Flickr

IMG_1405 by iiinasky, on Flickr
the front and back fascia of the box...

IMG_1406 by iiinasky, on Flickr
unboxed! the unit still wrapped with styro cloth.

IMG_1409 by iiinasky, on Flickr
the unit out! the accessories box opened!

IMG_1410 by iiinasky, on Flickr
this is a fully loaded unit. includes all the bells and whistles, loved that the mini-keyboard and wifi antenna were already included!

IMG_1411 by iiinasky, on Flickr
NICE!!!

IMG_1412 by iiinasky, on Flickr
Up close and personal...

its on latest firmware already. one quick question, can anybody help me, i can't get the unit to detect my etrayz, under upnp it will only recognized two folders the torrents and the iTunes folders, my contents are not saved there.

second, trying to make an nfs share between the two was unsuccessful, i can't get the path right i think or is there something i have to do with the etrayz settings as well?

Eddie · « **Reply #44 on:** Dec 06, 2011 at 02:25 PM »

Hi. I'll try to take a wing at it. Can you post or PM ip address of your etrayz and 500X2?

Have you checked if the NFS on the etrayz is enabled? Usually you have to turn on that service if you're on a NAS.

mstkiel · « **Reply #45 on:** Dec 07, 2011 at 09:34 PM »

guys may 32% off sa med500x2 sa yugadeals. 7,490 na lang may kasama ng wifi and wireless keyboard. check niyo

http://yugadeals.com/

rj_md · « **Reply #46 on:** Dec 12, 2011 at 02:23 PM »

went for the med500x2! does anyone know where and when to pick it up after the time lapses?

sorry, my first time at yugadeals.

Eddie · « **Reply #47 on:** Dec 12, 2011 at 05:02 PM »

I think it's best if you message them via twitter.

lncc63 · « **Reply #48 on:** Dec 20, 2011 at 05:31 AM »

Firmware 2.0.2 is out.

flxrms · « **Reply #49 on:** Dec 27, 2011 at 03:48 PM »

got my first nmt (Mede8er MED500X2) and its already updated to the latest Firmware 2.0.2.. really happy with the purchase at yugadeals.

Eddie · « **Reply #50 on:** Dec 27, 2011 at 08:31 PM »

Quote from: flxrms on Dec 27, 2011 at 03:48 PM

got my first nmt (Mede8er MED500X2) and its already updated to the latest Firmware 2.0.2.. really happy with the purchase at yugadeals.

Version 2.0.3 is out. How is the performance of the MED500X2?

stratix2 · « **Reply #51 on:** Dec 31, 2011 at 12:19 PM »

Got mine yesterday bundled with 2TB HDD..So far so good...

stratix2 · « **Reply #52 on:** Jan 14, 2012 at 01:17 PM »

Can someone help me out, I am trying to transfer files from the internal HDD to free up space and move some from my external hdd, thru my laptop but it seems the unit's driver cannot auto load to my laptop and recognize the connection. Is this because my laptop's usb port is only at 2.0 while that of mede8er is at 3.0 already? Anything I have done not right?

Eddie · « **Reply #53 on:** Jan 28, 2012 at 04:33 PM »

Quote from: stratix2 on Jan 14, 2012 at 01:17 PM

Can someone help me out, I am trying to transfer files from the internal HDD to free up space and move some from my external hdd, thru my laptop but it seems the unit's driver cannot auto load to my laptop and recognize the connection. Is this because my laptop's usb port is only at 2.0 while that of mede8er is at 3.0 already? Anything I have done not right?

USB 3 should be downward compatible. From my experience with players, you should turn on the unit while the usb is plugged in. If you've already done that, you can probably try a USB 2.0 cable. Sometimes if a drive cannot be connected, you should try disk management from windows. If all else fails, call the shop where you bought the product for assistance.

otep_32 · « **Reply #54 on:** Jan 28, 2012 at 06:12 PM »

Quote from: stratix2 on Jan 14, 2012 at 01:17 PM

Can someone help me out, I am trying to transfer files from the internal HDD to free up space and move some from my external hdd, thru my laptop but it seems the unit's driver cannot auto load to my laptop and recognize the connection. Is this because my laptop's usb port is only at 2.0 while that of mede8er is at 3.0 already? Anything I have done not right?

500x2 can transfer/copy/move/delete file from its internal hdd to external hdd w/out using laptop or computer.simply go to the file you want to copy then press EDIT from the remote of 500x.just follow the instructions on the OSD.

Conan · « **Reply #55 on:** Jan 28, 2012 at 08:33 PM »

Quote from: otep_32 on Jan 28, 2012 at 06:12 PM

500x2 can transfer/copy/move/delete file from its internal hdd to external hdd w/out using laptop or computer.simply go to the file you want to copy then press EDIT from the remote of 500x.just follow the instructions on the OSD.

Nice! I didn't know that.

tein · « **Reply #56 on:** Mar 07, 2012 at 11:42 PM »

Guys dont forget to update your firmwares sa newest, meron na sila harddrive/USB eject para d nasisira mga ni pluplug sa usb slots.

Enjoy your 500x2's

tein · « **Reply #57 on:** Mar 07, 2012 at 11:46 PM »

here's the link pala.

2.0.3
http://www.mede8erforum.com/index.php/topic,7561.0.html

2.0.4
http://www.mede8erforum.com/index.php/topic,8068.0.html

Starbuko · « **Reply #58 on:** Mar 09, 2012 at 09:54 AM »

Mga boss, kumusta naman performance ng torrent client ni X2? Any reviews or feedbacks? Thanks....

trigo · « **Reply #59 on:** Mar 26, 2012 at 11:51 AM »

how's the browsing speed on the new firmware, my only gripe is it takes too long to browse... am on xtreamer before and it is quite fast to browse.