Author Topic: LED 86C HTP Projector (Read 75127 times)

larokulit · « **Reply #270 on:** Feb 02, 2016 at 02:40 PM »

^not an owner pero regular ako dito sa thread. Based sa posts ng owners, meron syang keystore correction -- yung malaking knob sa likod.

czarsky · « **Reply #271 on:** Feb 02, 2016 at 04:36 PM »

True, nasa likod nga ung keystone correction . . . caution lang sa pag tilt kasi medyo limited lang yung adjustment na kaya nya

toys4geeks · « **Reply #272 on:** Feb 02, 2016 at 05:54 PM »

Does this get really hot? How long kaya ang lamp if meron man?

qguy · « **Reply #273 on:** Feb 02, 2016 at 06:23 PM »

The Lamp is LED, so it will last a long time, i think mas mauna masira yung other components before the LED bulb.

Quote from: toys4geeks on Feb 02, 2016 at 05:54 PM

Does this get really hot? How long kaya ang lamp if meron man?

qguy · « **Reply #274 on:** Feb 02, 2016 at 06:25 PM »

Wala akong 1280 x 768. it can go to a higher resolution, pero wala yung exact na 1280 x 768.

Quote from: LouPah on Feb 02, 2016 at 08:27 AM

It is because you might be using 720p resolution. Actually the true native resolution of Led86 is 1280 * 768, not 1280 * 800, as manual said. Try to change your laptop resolution into 1280*768. That also happen to my Led86c, my laptop automatically set to 720p. and yes the window screen is a bit smaller, when I change the resolution to 1280*768.....BOOM!

LouPah · « **Reply #275 on:** Feb 03, 2016 at 08:45 AM »

Quote from: qguy on Feb 02, 2016 at 06:23 PM

The Lamp is LED, so it will last a long time, i think mas mauna masira yung other components before the LED bulb.

Absolutely correct! my first projector is also LED. It takes four years and a couple of months of daily used before the power supply gone, but the LED bulb still shines.

LouPah · « **Reply #276 on:** Feb 03, 2016 at 08:58 AM »

Quote from: qguy on Feb 02, 2016 at 06:25 PM

Wala akong 1280 x 768. it can go to a higher resolution, pero wala yung exact na 1280 x 768.

I have no idea about that, kc hindi na ako gmagamit ng PC or Laptop for my Led86. I'm currently using WD TV live and Android Media players, it is more convenient than any other PC or laptop.

toys4geeks · « **Reply #277 on:** Feb 03, 2016 at 04:45 PM »

Quote from: qguy on Feb 02, 2016 at 06:23 PM

The Lamp is LED, so it will last a long time, i think mas mauna masira yung other components before the LED bulb.

Is the lamp replaceable orderable?for that price ok yan

swensonb · « **Reply #278 on:** Feb 03, 2016 at 10:08 PM »

Quote from: toys4geeks on Feb 03, 2016 at 04:45 PM

Is the lamp replaceable orderable?for that price ok yan

ayoko pa dissect yung unit ko bago pa kasi hehe para makita ko yung LED light niya

i think meron yan mabibilhan ang kutob ko yung led light niya is parang yung sa FLOODLIGHT na led
flat type na naka patong sa heatsink

kutob ko lang naman un

as for sa nagtatanong sa heat niya wala ako aircon dito sa sala ngayun but yung heat na lumalabas sa fan is mild normal lang at yung ikot ng fan niya is normal lang din hinde turbo

toys4geeks · « **Reply #279 on:** Feb 04, 2016 at 04:33 AM »

Quote from: swensonb on Feb 03, 2016 at 10:08 PM

ayoko pa dissect yung unit ko bago pa kasi hehe para makita ko yung LED light niya

i think meron yan mabibilhan ang kutob ko yung led light niya is parang yung sa FLOODLIGHT na led
flat type na naka patong sa heatsink kutob ko lang naman un

as for sa nagtatanong sa heat niya wala ako aircon dito sa sala ngayun but yung heat na lumalabas sa fan is mild normal lang at yung ikot ng fan niya is normal lang din hinde turbo

Your seller might know . I normally ask if pwede bumili ng spare lamp na bundle with unit order ( to make sure they can really supply) and I also ask for the part number.

Planning to get 1 for instant projector sa receiving room

oznola · « **Reply #280 on:** Feb 04, 2016 at 05:05 AM »

tanong lang if this will this work, pwede ko ba ikabit ang Chromecast or any similar screen casting device to the HDMI port of this PJ?

iniisip ko kasi na instead of wiring it, gawing wireless ang means of feeding the video to it.

TIA

larokulit · « **Reply #281 on:** Feb 04, 2016 at 05:39 AM »

Quote from: oznola on Feb 04, 2016 at 05:05 AM

tanong lang if this will this work, pwede ko ba ikabit ang Chromecast or any similar screen casting device to the HDMI port of this PJ?

iniisip ko kasi na instead of wiring it, gawing wireless ang means of feeding the video to it.

TIA

+1
I like this idea.

LouPah · « **Reply #282 on:** Feb 04, 2016 at 08:09 AM »

Quote from: toys4geeks on Feb 04, 2016 at 04:33 AM

Your seller might know . I normally ask if pwede bumili ng spare lamp na bundle with unit order ( to make sure they can really supply) and I also ask for the part number.

Planning to get 1 for instant projector sa receiving room

If you worry more about the LED lamp, you can buy it from this store....

http://www.aliexpress.com/store/product/220W-LED-Projector-lamp-Light-bulb-LED-86-or-LED-86-WIFI-Android-LED-projector-proyector/102283_32235720136.html

toys4geeks · « **Reply #283 on:** Feb 04, 2016 at 08:11 AM »

Ayos!

qguy · « **Reply #284 on:** Feb 04, 2016 at 08:39 AM »

Thats a 220 watt led bulb, Pero sa Specs ng LEd86 200 watt LED bulb.

LouPah · « **Reply #285 on:** Feb 04, 2016 at 08:39 AM »

Quote from: oznola on Feb 04, 2016 at 05:05 AM

tanong lang if this will this work, pwede ko ba ikabit ang Chromecast or any similar screen casting device to the HDMI port of this PJ?

iniisip ko kasi na instead of wiring it, gawing wireless ang means of feeding the video to it.

TIA

Not tried yet, but I think it should work, because Chromecast is a plug & play device & this projector have two HDMI inputs and USB inputs too, to power up the Chromecast or similar one.

LouPah · « **Reply #286 on:** Feb 04, 2016 at 08:46 AM »

Quote from: qguy on Feb 04, 2016 at 08:39 AM

Thats a 220 watt led bulb, Pero sa Specs ng LEd86 200 watt LED bulb.

Smart observation! But read the note in the picture, " Projector Spare LED-86 or LED-86+"

qguy · « **Reply #287 on:** Feb 04, 2016 at 09:55 AM »

Doon ako nagtataka. if its the same bulb, should'nt the UNIC manufacturer specify na 220 watt bulb yung LED 86, which makes the specs look better ?

Quote from: LouPah on Feb 04, 2016 at 08:46 AM

Smart observation! But read the note in the picture, " Projector Spare LED-86 or LED-86+"

LouPah · « **Reply #288 on:** Feb 04, 2016 at 10:13 AM »

Hahaha! You worry a lot about the bulb. Its LED, supposedly it will lasts long. As I mentioned before, my first projector is also LED, after four years of daily used the power supply of projector died, but the LED still shines.

markcrenz · « **Reply #289 on:** Feb 04, 2016 at 11:51 AM »

Quote from: qguy on Feb 04, 2016 at 09:55 AM

Doon ako nagtataka. if its the same bulb, should'nt the UNIC manufacturer specify na 220 watt bulb yung LED 86, which makes the specs look better ?

Conversely, maybe UNIC downplayed the PJ specs to provide a "greener" appeal to energy-conscious consumers. Either way, one (maybe even both?) of those manufacturers is(are) guilty of false advertisement!

Quote from: LouPah on Feb 04, 2016 at 10:13 AM

Hahaha! You worry a lot about the bulb. Its LED, supposedly it will lasts long. As I mentioned before, my first projector is also LED, after four years of daily used the power supply of projector died, but the LED still shines.

Good thing your PSU just died. There is a different mode of LED driver failure that would let unregulated, higher voltage/current pass and destroy the LED bulb.

qguy · « **Reply #290 on:** Feb 05, 2016 at 05:48 AM »

Do you leave the main switch at the back at the ON position or do you turn it OFF. Medjo mahirap to turn OFF when it already ceiling mounted.

LouPah · « **Reply #291 on:** Feb 05, 2016 at 08:44 AM »

Never turn it off since installed in the ceiling. Ginawan ko sya ng sariling wall swicth, parang wall switch lang ng ilaw sa bahay. Yon lang ang ON & Off ko every time I use it.

czarsky · « **Reply #292 on:** Feb 05, 2016 at 07:47 PM »

In my case, since wall mounted at di na accesible, I used an extension at dun sa power strip ng AVR at Media Player ko sinama para isang patayan na lang.

czarsky

LouPah · « **Reply #293 on:** Feb 06, 2016 at 08:22 AM »

That also a great idea, kahit ano nman kung saan ka mas convenient, kung baga para-paraan lang yan...

toys4geeks · « **Reply #294 on:** Feb 06, 2016 at 08:43 AM »

Quote from: czarsky on Feb 05, 2016 at 07:47 PM

In my case, since wall mounted at di na accesible, I used an extension at dun sa power strip ng AVR at Media Player ko sinama para isang patayan na lang.

czarsky

Doesn't it shorten the life of the bulb / unit if you shut it abruptly?

AFAIK power down needs a cool down but not really sure for led. Anyways check nyo lang.

LouPah · « **Reply #295 on:** Feb 06, 2016 at 09:09 AM »

NO sir! This projector has the ability to delayed the total power's off, you can only hear the fans running to cool down the unit, then a couple of min/sec. the projector will totally power shuts down by itself. That's the time you can now switch off the power source.

czarsky · « **Reply #296 on:** Feb 06, 2016 at 10:55 AM »

Yup, that's what I always do, I wait until the fans are OFF (no more hissing sound) before I switch off the power strip

toys4geeks · « **Reply #297 on:** Feb 06, 2016 at 06:01 PM »

Looks like am heading to this soon

swensonb · « **Reply #298 on:** Feb 07, 2016 at 01:19 AM »

daytime pics while having lunch...TV mode

excuse the mess point and shoot lang

nightime pics sorry for the angle point and shoot lang uli while sitting on my pc

played via PS3 showtime media player app

regards
swensonb

swensonb · « **Reply #299 on:** Feb 07, 2016 at 01:51 AM »

mga sirs ano po user settings niyo para sa

contrast
brightness
color
sharpness
noise reduction

thanks