Author Topic: Speaker DIY'ers (Read 310228 times)

tony · « **Reply #810 on:** May 07, 2014 at 07:24 PM »

Quote from: audiojunkie on May 07, 2014 at 06:44 PM

Sa PBB gusto ko audition...

late ka na....nagsimula na yung show....

Gino · « **Reply #811 on:** Jun 09, 2014 at 02:52 PM »

My 4.5" fullrange speakers arrived. They sent the wrong ports. I ordered 2"x7" they sent 3"x12". It's ok. I have time. I am still ordering a Rockwell Versacut saw. I planning to DIY 5L ported boxes.

RXV · « **Reply #812 on:** Jun 09, 2014 at 03:06 PM »

Very nice, dumating na pala. Good luck on your DIY enclosure

Gino · « **Reply #813 on:** Jun 09, 2014 at 03:17 PM »

In record time too. 12 days USPS Priority shipping.

RXV · « **Reply #814 on:** Jun 09, 2014 at 08:06 PM »

Oh, papapalit mo pa pala ports, hassle man for their error :s

Gino · « **Reply #815 on:** Jun 09, 2014 at 08:21 PM »

Ok na. Madisound shipped the correct ports. I am now waiting for vendor replies for the Rockwell Versacut saw.

JojoD818 · « **Reply #816 on:** Jun 10, 2014 at 01:28 PM »

Quote from: Gino on Jun 09, 2014 at 02:52 PM

My 4.5" fullrange speakers arrived. They sent the wrong ports. I ordered 2"x7" they sent 3"x12". It's ok. I have time. I am still ordering a Rockwell Versacut saw. I planning to DIY 5L ported boxes.

Advance congrats sa project mo bro... charge na ng battery, linis na ng lens, at ilabas na ang tripod.

Gino · « **Reply #817 on:** Jun 10, 2014 at 01:36 PM »

Huntiing pa ng mdf. May alam ba kayong stores ng 18mm mdf QC area.

Cjtjader · « **Reply #818 on:** Jun 10, 2014 at 02:41 PM »

Goodluck on your build, Sir Gino!

remington · « **Reply #819 on:** Jun 10, 2014 at 02:43 PM »

Quote from: Gino on Jun 10, 2014 at 01:36 PM

Huntiing pa ng mdf. May alam ba kayong stores ng 18mm mdf QC area.

try igross marketing at new york street near betty go belmonte lrt station

RXV · « **Reply #820 on:** Jun 10, 2014 at 05:44 PM »

Quote from: Gino on Jun 10, 2014 at 01:36 PM

Huntiing pa ng mdf. May alam ba kayong stores ng 18mm mdf QC area.

When I was still in QC, I bought MDF from a wood supplier along Roosevelt Avenue in San Francisco Del Monte, QC.

Topwood yata pangalan. P1200 per 4'x8' sheet, but that was around a year ago, di ko alam kung tumaas na price.

Gino · « **Reply #821 on:** Jun 10, 2014 at 08:35 PM »

Thanks for the options.

deist · « **Reply #822 on:** Jun 11, 2014 at 01:55 PM »

good luck sa project Gino & pls keep us posted on the development

Gino · « **Reply #823 on:** Jun 11, 2014 at 02:03 PM »

My saw is in the mail. Waiting game. I tested the drivers in free air and the top end is sparkling and detailed. I'm excited with this.

arbitrage · « **Reply #824 on:** Jun 13, 2014 at 09:16 AM »

Nakaka inspire mga full range builders parang gusto ko sumali sa kulto na to....

hehehehe...

Okay lang ba kahit 50 watter na amp ang gamitin para sa fullrange build or advisable talaga na low powered SETs?

Gino · « **Reply #825 on:** Jun 13, 2014 at 10:03 AM »

It will do in the meant time. May gains ka pa din in a terms of point source imaging and lack of crossover. How well it sounds depends on the rest of your source, gears and your room.

Be warned though that this route is not cheaper. But for us set users, it is the practical way to go.

tony · « **Reply #826 on:** Jun 13, 2014 at 10:15 AM »

Quote from: hearhead on Jun 13, 2014 at 09:16 AM

Nakaka inspire mga full range builders parang gusto ko sumali sa kulto na to....

hehehehe...

Okay lang ba kahit 50 watter na amp ang gamitin para sa fullrange build or advisable talaga na low powered SETs?

depende yan sa kung ano magugustohan ng tenga mo...ikaw ang makikinig....

Gino · « **Reply #827 on:** Jun 17, 2014 at 12:58 PM »

Game on! Still waiting for the ports. Next up, finding wood and clamps.

[

rochie · « **Reply #828 on:** Jun 17, 2014 at 01:32 PM »

My DIY fullrange speaker project side by side with my fullrange array, next will be the paint job.

arbitrage · « **Reply #829 on:** Jun 17, 2014 at 07:26 PM »

Quote from: Gino on Jun 17, 2014 at 12:58 PM

Game on! Still waiting for the ports. Next up, finding wood and clamps.

[

Exciting!! Update us on this build. Konti na lang parang gusto ko na din sumubok mag DIY ng full range. Lakas maka BI ng thread na 'to... Hehehehe...

Gino · « **Reply #830 on:** Jun 17, 2014 at 07:53 PM »

Yes it is really exciting. The Versacut is very light and not too intimidating. I ripped through some small logs this afternoon. I cut up a fallen tree for disposal. Very able saw. It's 110v though. My outlets are 110v.

This week I'll shop for wood and clamps.

Gino · « **Reply #831 on:** Jun 19, 2014 at 01:38 PM »

P1200 pa din ang 18mm mdf sa Topwood, Roosevelt. Problem is buo. I need a way to transport a whole board. My saw is 110v so I cannot cut on site.

fredreadrick · « **Reply #832 on:** Jun 19, 2014 at 02:00 PM »

Quote from: Gino on Jun 19, 2014 at 01:38 PM

P1200 pa din ang 18mm mdf sa Topwood, Roosevelt. Problem is buo. I need a way to transport a whole board. My saw is 110v so I cannot cut on site.

Sir, baka may malapit na wood workshop dun, pa-cut mo na like what i did para lang magkasya sa "car".

RXV · « **Reply #833 on:** Jun 19, 2014 at 02:02 PM »

Quote from: Gino on Jun 19, 2014 at 01:38 PM

P1200 pa din ang 18mm mdf sa Topwood, Roosevelt. Problem is buo. I need a way to transport a whole board. My saw is 110v so I cannot cut on site.

Bro Gino,

Did you ask them if they can do cutting services for a minimal fee? Alam ko kasi malaki yung TopWood na yan e, nasa likod ng shop nila yung cutting facilities nila and for their wood storage, like a small warehouse, parang may nakita akong circular table saw sila years back when I went there.

Gino · « **Reply #834 on:** Jun 19, 2014 at 02:07 PM »

They said they don't cut. The can allow ac use for a personal saw. However 110v ang saws ko. Anyway, I'll start looking for a big vehicle.

remington · « **Reply #835 on:** Jun 19, 2014 at 02:50 PM »

padeliver mo nalang sir baka pwede sa kanila w/fee mas mahal umarkila kaysa padeliver

dana · « **Reply #836 on:** Jun 19, 2014 at 03:06 PM »

Quote from: Gino on Jun 19, 2014 at 02:07 PM

They said they don't cut. The can allow ac use for a personal saw. However 110v ang saws ko. Anyway, I'll start looking for a big vehicle.

Quote from: Gino on Jun 19, 2014 at 01:38 PM

P1200 pa din ang 18mm mdf sa Topwood, Roosevelt. Problem is buo. I need a way to transport a whole board. My saw is 110v so I cannot cut on site.

padeliver, if ok per remington...
else, do you have a stepdown transformer (100V or 110V) that you can bring?
pede rin makihiram sa Topwood if they have...
500w transformer may do the job (?)...pedeng bitbitin na rin

JojoD818 · « **Reply #837 on:** Jun 19, 2014 at 08:06 PM »

Quote from: Gino on Jun 17, 2014 at 12:58 PM

Game on! Still waiting for the ports. Next up, finding wood and clamps.

[

Congrats! Umpisahan na ang project bro.

Quote from: Gino on Jun 19, 2014 at 02:07 PM

They said they don't cut. The can allow ac use for a personal saw. However 110v ang saws ko. Anyway, I'll start looking for a big vehicle.

Magdala ka na din ng transformer.

Oldboyracer · « **Reply #838 on:** Jun 19, 2014 at 08:37 PM »

Hi Gino, all the best for this project

.

Gino · « **Reply #839 on:** Jun 19, 2014 at 11:54 PM »

Can a 500w transformer handle this 4amp 110v saw?