0 Members and 3 Guests are viewing this topic.
sir,mukhang my masama kang balak ah, share mo namn sakin.... ibulong mo lng pra d nila madinig
handyman,musta ml tl?
Subwoofer Project - Tempest Low Q Enclosure
Hmmm....... anong balak yan? Malamang speaker...nasa Speakers thread kasi eh... hmmm
Jo,Thanks 3/4" marine ply ang ginamit ko...tapos babalutan ko sya ng 3/4" pinewood for finishing. Mabangis talagang sub to, 15" ang woofer, 250 watts ang amp, cabinet halos kasing taas ng wharfs 8.4 ko.
Wow, it's taking shape na ah! Mas malaki pala sya sa Titan II, at ang laki din ng driver!Walang kawala yun mga side panels sa bracing mo bro. Keep us posted!
Jo, here's the link for the cabinet design...actually natest ko na sya kagabi, kahit kulang pa ang stuffing at temporary pa ang top panel. http://www.acoustic-visions.com/~acoustic/products/subwoofer_drivers/adire_15_tempest/sealedtempest.pdf
Most of the better commercials subs out there use 700-1000 watts RMS amps. Maybe such amps can really optimize the tempest design. But for its 12" woofer and baffle size, baka overkill na yung high wattage amps.
Handyman,Galeng naman ng sub na yan! Siguro gumagawa ng mini theatre yung owner nyan at 250w using a 15" driver, it really needs a large room.
Bawal pala sa mga mahina ang weak lungs yang sub na yan
Wow! Can you give me a price range of these "batter commercial subs" that are out there?Could these probably be Class B or D amps? Pero kakagigil naman yun 1000W, as long as RMS and not PMPO.
Wow! Ganda wood spikes mo Bon! Para na pala mini-fridge ano? So how's the sound bro? I love gypsum screws too you know.
bros, do u have a way to turn a 6 ohms speaker into 8 ohms, without opening it? salamat po!
Why? Are you concerned that your amp is rated for 8 ohms and the speaker says it's a 6 ohm? The rating is a "nominal" resistance. Speakers are dynamic, not static resistance. A 6 or 8 ohm rating is just the average. The actual resistance will change with frequency. It could be as high as 40 ohms or as low as 3 ohms at different points. Chances are, if you have a solid state amp rated for 8 ohms and the speaker is 6 ohms it will probably play fine. If you're worried you could put a 2 ohm resistor (or even higher) on the positive terminal of the speaker but this may change the way the speaker sounds. However, it may be a change for the better!
Thanks..tama ka parang mini frigde..kasamang ibinigay ng may ari sa akin yung spikes...pinatorno nya.Ganda both movies and audio...di ko kayang tagalan ng malakas ang volume....para na kong naghahamon ng away sa kapitbahay. hintayin na lang natin yung may-ari ang magkuwento pag nasa kanya na...
Baka pag Saving Private Ryan and panonoorin mo biglang dumapa ang mga kapitbahay at akalaing bumalik na ang mga hapon! Congrats sa owner nyan sub na yan, sana madinig namin in the future. May pics na ba finished product Bon?