Nice one brader magkano nagastos mo sa lahat lahat? Mukhang like ko din pagawa sa karpitero na gumagawa sa bahay namin yan.
Let me see. Yung iba, approximate price lang since di ko na maalala exact price)
1/2" plywood (P550). Pili ka lang ng flat na plywood kasi yung ibang plywood sa hardware medyo warped ng kaunti. Let the plywood stand on its side para makita mo kung baliko o hindi.
Boysen flat wall enamel (P150)
Roller brush with paint tray for the white paint - Large (P90)
Boysen glazing putty (P160). Only small amount was used since generally makinis naman yung nabili kong plywood. Kung wala namang malaking uka yung plywood, you won't need this.
Metal spreader for the glazing putty (P30)
Masking tape (P40). After painting the entire plywood white, wait for it to dry. Pag tuyo na, put masking tape all around to delineate yung junction ng white screen at yung black border (so that when you paint the black border, di kakalat sa white part ng screen and para diretso rin yung black border). After painting the black border, make sure to remove the masking tape BEFORE the black paint dries up.
Roller brush with paint tray for black border - small (P40)
Other things na nagamit but didn't buy anymore since meron pa akong sobra sa house:
- black paint. Gloss pala yung meron ako sa house. Dapat talaga flat and not gloss para walang reflection. Too bad at sarado ang hardwares pero ok na rin ito. Will just repaint later or cover with felt paper.
- sanding paper
Useful tools which made my job easy
- jigsaw
- electric sander