Author Topic: Egreat R-Series(1073) R200 Users & Support Thread (Read 93446 times)

Furry · « **Reply #330 on:** Aug 17, 2011 at 09:42 AM »

Quote from: Courage on Aug 16, 2011 at 08:59 PM

Yeahhh its neat brader furry..... Havent tried to connect to the internet to test the others though...

Finally tested the other interface. The Mede8er is nice but i still went back to the eGreat look!

Courage · « **Reply #331 on:** Aug 17, 2011 at 10:54 PM »

Quote from: Furry on Aug 17, 2011 at 09:42 AM

Finally tested the other interface. The Mede8er is nice but i still went back to the eGreat look!

Same here... mas gusto ko Original he he he

frootloops · « **Reply #332 on:** Aug 18, 2011 at 03:18 PM »

Bro, maraming salamat sa backlit remote! Stig!

toys4geeks · « **Reply #333 on:** Aug 18, 2011 at 04:02 PM »

Quote from: frootloops on Aug 18, 2011 at 03:18 PM

Bro, maraming salamat sa backlit remote! Stig!

Congratulations brader for winning the Q1/Q2 2011 raffle. enjoy the remote!

stickfighter · « **Reply #334 on:** Aug 19, 2011 at 01:42 AM »

I got myself a backlit remote as well.

Have not had the chance to use it yet, but I will once I have time.

Thanks again sir Jim!

toys4geeks · « **Reply #335 on:** Aug 19, 2011 at 03:32 AM »

Quote from: stickfighter on Aug 19, 2011 at 01:42 AM

I got myself a backlit remote as well. Have not had the chance to use it yet, but I will once I have time. Thanks again sir Jim!

basic how to program the (blue) TV buttons, nasa --

http://toys4geeks.nexus.ph/backlit-remote-controller-r200r200-pro.html

pagtapatin ang remote, follow the instructions, to let your TV remote tell NMT remote what your power, volume up/ volume down and video source selection buttons are.

few PDVD Backlit remote owners (limited stocks lang):
ricky, frootloops, stickfighter, indieboy

indie boi · « **Reply #336 on:** Aug 19, 2011 at 11:02 PM »

The remote is wonderful. It's now the most expensive looking remote on my table haha!

By the way, I have noticed that the R200 detected external hard drives much faster after the FW update. I think it shaved off up to five seconds, which is quite significant.

Furry · « **Reply #337 on:** Aug 20, 2011 at 07:22 PM »

Quote from: indie boi on Aug 19, 2011 at 11:02 PM

By the way, I have noticed that the R200 detected external hard drives much faster after the FW update. I think it shaved off up to five seconds, which is quite significant.

^ yan din napansin ko and bumili yun bootup time niya with the logo

I like it much, much more now! Kulang na lang is backlit remote

toys4geeks · « **Reply #338 on:** Aug 21, 2011 at 12:48 AM »

Quote from: Furry on Aug 20, 2011 at 07:22 PM

^ yan din napansin ko and bumili yun bootup time niya with the logo I like it much, much more now! Kulang na lang is backlit remote

bili lang sir , i still have a few backlit remote with programmable TV buttons (power on/volume+ volume - / video select ) simply click below:

sardaukar · « **Reply #339 on:** Aug 22, 2011 at 08:00 AM »

I've only just browsed the new fw and it definitely looks better. Questions on the additional features though. I couldn't get the jukebox or youtube to work. It was saying something like service unavailable or something like that. It also says something like unable to play media in youtube. I was able to get the radio, picassa and weather to work. Weather would be more useful if it's possible to make Manila the default city. Pwede kaya?

toys4geeks · « **Reply #340 on:** Aug 22, 2011 at 09:22 AM »

Quote from: sardaukar on Aug 22, 2011 at 08:00 AM

I've only just browsed the new fw and it definitely looks better. Questions on the additional features though. I couldn't get the jukebox or youtube to work. It was saying something like service unavailable or something like that. It also says something like unable to play media in youtube. I was able to get the radio, picassa and weather to work. Weather would be more useful if it's possible to make Manila the default city. Pwede kaya?

will ask.

anchit · « **Reply #341 on:** Aug 22, 2011 at 07:53 PM »

brader Jim i replied sa PM mo before on the promo price ng Backlt remote but didnt receive a response. is it available? thanks!

toys4geeks · « **Reply #342 on:** Aug 26, 2011 at 11:49 AM »

Quote from: anchit on Aug 22, 2011 at 07:53 PM

brader Jim i replied sa PM mo before on the promo price ng Backlt remote but didnt receive a response. is it available? thanks!

hi anchit, as ordered, drop off scheduled next week. will text.

vortex1 · « **Reply #343 on:** Sep 07, 2011 at 04:37 PM »

Bro Jim,i just noticed that my laptop still scans my hdd every time I connect it. same issue i posted way back is still recurring.the laptop scans(check disks) both my external and internal hdds. i've done everything on the NMT like proper shutdowns and making sure i stop the movie before turning it off and also BT/Samba is disabled. what can be the issue here?

@r200 users: do you guys experience this as well? if not, what are you doing properly for the issue not to happen.

I'm a bit concerned with the 2tb hdd's lifespan.please help. thanks.

Courage · « **Reply #344 on:** Sep 07, 2011 at 10:30 PM »

Quote from: indie boi on Aug 19, 2011 at 11:02 PM

The remote is wonderful. It's now the most expensive looking remote on my table haha!

By the way, I have noticed that the R200 detected external hard drives much faster after the FW update. I think it shaved off up to five seconds, which is quite significant.

I noticed this too... +1

toys4geeks · « **Reply #345 on:** Sep 08, 2011 at 05:05 AM »

Hi vortex1,

Are you on the 3-in-1 v39 firmware or still at the v39 old firmware?

Only reason, after all services are down, is that there are other mapped drives that still keeps your disks in use, such that when the NMT shuts down, it leaves it in an open state and thus a filesystem check is necessary.

Quote from: vortex1 on Sep 07, 2011 at 04:37 PM

Bro Jim,i just noticed that my laptop still scans my hdd every time I connect it. same issue i posted way back is still recurring.the laptop scans(check disks) both my external and internal hdds. i've done everything on the NMT like proper shutdowns and making sure i stop the movie before turning it off and also BT/Samba is disabled. what can be the issue here?

@r200 users: do you guys experience this as well? if not, what are you doing properly for the issue not to happen.

I'm a bit concerned with the 2tb hdd's lifespan.please help. thanks.

mcjefferson · « **Reply #346 on:** Sep 08, 2011 at 07:28 AM »

Hi sir, where can i download firmware update for m34a? i have problems playing my .mkv files it play smooth in the beginning but after 20 sec it hangs up. i have i think 8 files in diff title that experiencing the same issue. i think installing new updates will solve the issue.

vortex1 · « **Reply #347 on:** Sep 08, 2011 at 08:38 AM »

Quote from: toys4geeks on Sep 08, 2011 at 05:05 AM

Hi vortex1,

Are you on the 3-in-1 v39 firmware or still at the v39 old firmware?

Only reason, after all services are down, is that there are other mapped drives that still keeps your disks in use, such that when the NMT shuts down, it leaves it in an open state and thus a filesystem check is necessary.

i already updated it to the 3in1 v39. so what can we do about this? what other ways can this NMT terminate all its services in order for it to shutdown properly?

It seems that I'm the only one experiencing this.

toys4geeks · « **Reply #348 on:** Sep 08, 2011 at 10:25 AM »

Quote from: vortex1 on Sep 08, 2011 at 08:38 AM

i already updated it to the 3in1 v39. so what can we do about this? what other ways can this NMT terminate all its services in order for it to shutdown properly?

It seems that I'm the only one experiencing this.

How many network enabled devices do you have at home? i'd suspect there's one that accessing the service passively. or that the AV ondemand is scanning proactively mapped drives. I normally off on demand and exclude mkv files

qball · « **Reply #349 on:** Sep 08, 2011 at 10:42 AM »

Quote from: vortex1 on Sep 07, 2011 at 04:37 PM

Bro Jim,i just noticed that my laptop still scans my hdd every time I connect it. same issue i posted way back is still recurring.the laptop scans(check disks) both my external and internal hdds. i've done everything on the NMT like proper shutdowns and making sure i stop the movie before turning it off and also BT/Samba is disabled. what can be the issue here?

@r200 users: do you guys experience this as well? if not, what are you doing properly for the issue not to happen.

I'm a bit concerned with the 2tb hdd's lifespan.please help. thanks.

I also encounter this with my Egreat R1-II. I'm using a WD Elements, waited for about a minute before pushing the standby button. But when connected to my computer, it scans the hd for errors. Tried this for about three times. The r1-ii wasn't network connected.

vortex1 · « **Reply #350 on:** Sep 08, 2011 at 11:23 AM »

Quote from: toys4geeks on Sep 08, 2011 at 10:25 AM

How many network enabled devices do you have at home? i'd suspect there's one that accessing the service passively. or that the AV ondemand is scanning proactively mapped drives. I normally off on demand and exclude mkv files

only the laptop is wifi enabled. i really don't think that's the issue bro. the question is, why wouldn't this device shutdown properly and terminate any active jobs/services on its device upon shutdown?

Can you kindly bring this up on Egreat website? thanks for the help.

Quote from: qball on Sep 08, 2011 at 10:42 AM

I also encounter this with my Egreat R1-II. I'm using a WD Elements, waited for about a minute before pushing the standby button. But when connected to my computer, it scans the hd for errors. Tried this for about three times. The r1-ii wasn't network connected.

i really think this is a big problem as all our HDDs lifespan will be affected. next thing you know, your hdd already had multiple bad sectors and that's the start of an HDD failure.

toys4geeks · « **Reply #351 on:** Sep 08, 2011 at 03:59 PM »

Quote from: vortex1 on Sep 08, 2011 at 11:23 AM

only the laptop is wifi enabled. i really don't think that's the issue bro. the question is, why wouldn't this device shutdown properly and terminate any active jobs/services on its device upon shutdown?

Can you kindly bring this up on Egreat website? thanks for the help.

i really think this is a big problem as all our HDDs lifespan will be affected. next thing you know, your hdd already had multiple bad sectors and that's the start of an HDD failure.

copied this and sent to them for support.

I looked at your issue before, and last night, I've been doing R200 in 3-in-1 firmware on R200. when i plug my laptop via USB slave, i dont get it as long as i stop the movie(if on disk) before powering down. no special services running.

just the same I copied below and ask what they think.

toys4geeks · « **Reply #352 on:** Sep 08, 2011 at 04:08 PM »

Quote from: qball on Sep 08, 2011 at 10:42 AM

I also encounter this with my Egreat R1-II. I'm using a WD Elements, waited for about a minute before pushing the standby button. But when connected to my computer, it scans the hd for errors. Tried this for about three times. The r1-ii wasn't network connected.

R1-ii and R200 has different fw so i'll log it seperately. Need help with screen shot of your services running just to make sure we've documented it.

To share, currently i use R1-ii is now doing transmissions downloads and when i power off, check on a PC via USB slave, i confirm the DL services shutdown properly in R1-ii. that said, i think the services shut down properly.

I'll try to access SMB services later and see if i can duplicate your concern.

Somethings there in the settings (admittedly daming setting ngayon ng R1-ii UI). I'm getting a WD elements monday so i'd have a close the services if you are not using it via config. mine is all off except the Transmissions.

@vortex, is your disk WD elements or internal also behaves like so?

linux SMB service

vortex1 · « **Reply #353 on:** Sep 08, 2011 at 05:26 PM »

i'm using two internal samsung hdd connected to the sata and internal tray of r200. thanks bro.

vortex1 · « **Reply #354 on:** Sep 16, 2011 at 11:17 AM »

any update on the issue?

toys4geeks · « **Reply #355 on:** Sep 16, 2011 at 12:47 PM »

Quote from: vortex1 on Sep 16, 2011 at 11:17 AM

any update on the issue?

Hi vortex1,

They tried duplicating your problem and cant find how you get your reported case.

They asked you try to:
a. as USB slave (internal drive), scandisk NMT drive for loose file/folder pointer
b. remove NMT from network (to isolate passive drive mounts/scan) and reboot
c. as NMT, watch video, stop, select other drive / USB, then power off (as sequenced)
d. repeat item a, if access to drive will prompt the error again.

meantime, i've asked if they can include a safe powerdown filesystem unmount check before pressing power. They have not yet replied on this suggestion.

vortex1 · « **Reply #356 on:** Sep 16, 2011 at 01:53 PM »

Quote from: toys4geeks on Sep 16, 2011 at 12:47 PM

Hi vortex1,

They tried duplicating your problem and cant find how you get your reported case.

They asked you try to:
a. as USB slave (internal drive), scandisk NMT drive for loose file/folder pointer
b. remove NMT from network (to isolate passive drive mounts/scan) and reboot
c. as NMT, watch video, stop, select other drive / USB, then power off (as sequenced)
d. repeat item a, if access to drive will prompt the error again.

meantime, i've asked if they can include a safe powerdown filesystem unmount check before pressing power. They have not yet replied on this suggestion.

I'll try this. Thanks sir for the help.

toys4geeks · « **Reply #357 on:** Sep 16, 2011 at 01:57 PM »

Guys, are there others experiencing this? I cant duplicate this.

vortex1 · « **Reply #358 on:** Sep 16, 2011 at 03:29 PM »

I do think that I'm not the only one experiencing this issue. they probably don't notice this yet.

Here's what I have:
1 80GB USB 2.5 in. external HDD connected to the USB port of the R200
1 2TB WD 3.5in. internal HDD connected to the SATA port
1 2TB WD 3.5in. internal HDD inside the NMT tray

I did all of these steps:
a. as USB slave (internal drive), scandisk NMT drive for loose file/folder pointer
b. remove NMT from network (to isolate passive drive mounts/scan) and reboot
c. as NMT, watch video, stop, select other drive / USB, then power off (as sequenced)
d. repeat item a, if access to drive will prompt the error again.

I then connect them 1 by 1 to my laptop. Windows 7 performed scandisks on these drives:
1 80GB USB 2.5 in. external HDD connected to the USB port of the R200
1 2TB WD 3.5in. internal HDD connected to the SATA port

only the drive inside the tray was safely opened by Windows.

Can you pls submit this to egreat for them to evaluate. thanks again bro.

toys4geeks · « **Reply #359 on:** Sep 16, 2011 at 05:19 PM »

Hi vortex,

in below, if internal drives are not having scandisk prompt on windows, then is it safe to assume the internal drives unmount properly? (yes/no)
or not always?(sometimes internal drive, all the time internal drive, never happens)

so in effect, only the external USB + bare sata is experiencing this scandisk prompt on windows.

A few inquiries on my end:

Is it isolated for every power up, playback, powerdown sequence? (yes/no)
or does it manifest on power up, powerdown without playback? (yes/no)

Just the same i cut below and reported your observation.

Quote from: vortex1 on Sep 16, 2011 at 03:29 PM

I do think that I'm not the only one experiencing this issue. they probably don't notice this yet.

Here's what I have:
1 80GB USB 2.5 in. external HDD connected to the USB port of the R200
1 2TB WD 3.5in. internal HDD connected to the SATA port
1 2TB WD 3.5in. internal HDD inside the NMT tray

I did all of these steps:
a. as USB slave (internal drive), scandisk NMT drive for loose file/folder pointer
b. remove NMT from network (to isolate passive drive mounts/scan) and reboot
c. as NMT, watch video, stop, select other drive / USB, then power off (as sequenced)
d. repeat item a, if access to drive will prompt the error again.

I then connect them 1 by 1 to my laptop. Windows 7 performed scandisks on these drives:
1 80GB USB 2.5 in. external HDD connected to the USB port of the R200
1 2TB WD 3.5in. internal HDD connected to the SATA port

only the drive inside the tray was safely opened by Windows.

Can you pls submit this to egreat for them to evaluate. thanks again bro.