Topic: How to hide your speaker wires?

[Nelson de Leon]

@nelson
ano bang hdmi version ang 3d ready na sir? medyo mahal din pala ang mahahabang hdmi =(

Si Mods Iinas ata may binebentang HDMI 1.4 na.

[toys4geeks]

That was my mistake -- I wired mine with an HDMI 1.3 + rear speaker cables to the ceiling from the floor (wood flooring kasi pede via floor), running on a 1", I'm stuck with it  now that i plan to go HDMI 1.4.

ok ang 2" na PVC (forget flexihose), straight paths ang layout and ask that the joints be scored and use contact cement para walang galaw sa joints come hatakan.

Take pictures before they close the ceiling, para you can go back and review.

[praktikal]

+1

also, pagpinasok mo na ang kable make sure na balutan mo kahit ice candy plastic wrapper lang ang (mga) dulo ng kable para mas madulas at hindi masira esp. hdmi. hth 

[melio]

tsk, tsk... sana hindi ko ito nakita... ang isa pang pumipigil sa akin na magkaroon ng rear eh hindi ko maitatago yung wires...  budget na lang... hehe...

Pwede po kayo gumamit ng plastic moldings. Madami po nito sa Ace Hardware at Handyman. Available in different sizes.

Sample picture

[oReOsHaKe]

That was my mistake -- I wired mine with an HDMI 1.3 + rear speaker cables to the ceiling from the floor (wood flooring kasi pede via floor), running on a 1", I'm stuck with it  now that i plan to go HDMI 1.4.

ok ang 2" na PVC (forget flexihose), straight paths ang layout and ask that the joints be scored and use contact cement para walang galaw sa joints come hatakan.

Take pictures before they close the ceiling, para you can go back and review.

yong PVC na gamitin ba dapat yong solid lang and not the accordion type?  maalala ko kasi sa present HT ko now, accordion type na PVC ginamit ng contractor ko.. What do you mean by "joints be scored" sir toys4geeks?

[toys4geeks]

yong PVC na gamitin ba dapat yong solid lang and not the accordion type?  maalala ko kasi sa present HT ko now, accordion type na PVC ginamit ng contractor ko.. What do you mean by "joints be scored" sir toys4geeks?

solid PVC wag accordion, ok yan if one time big time ang cabling mo pero if you plan to pull wires and replace, use the 2" PVC pipes.

Usually pipes and elbows will hold when forced, pero over time, siempre luluwag ang joints sa elbow and PVC pipe. what you need to make sure is you score/scratch with a filer or a lagaring bakal , soak with PVC contact cement ba yun(?) (clear ito, much like what you use for plumbing)

use the orange one and take good brands ng PVC

[merdenoms]

Entrance



Left Side ( dun na po ilalagay yung tv )


sabi po ng karpintero, tig isang wire at pvc para dun sa dalawang rear... bali dalawang magkahiwalay na PVC from front to rear.. tapos dun sa rear sabi nya, maglalagay daw sya ng plate ( yung parang saksakan na kulay orange ) yun ba yung parang extension na kung saan pwede mo isaksak yung speakers with plugs? o nga pala, nagpaabang na rin ako ng projector... gano ba dapat kalayo ang projector sa projector screen? thank you!

[jll]

May contractor ba kayo na pwede recommend to help me w/ my unit's set-up (cable management and ceiling/wall mounting)? Nakakalat kasi speaker wires ko sa sahig and pinatungan ko lang ng rag para hindi makatalisod.

[audiojunkie]

May contractor ba kayo na pwede recommend to help me w/ my unit's set-up (cable management and ceiling/wall mounting)? Nakakalat kasi speaker wires ko sa sahig and pinatungan ko lang ng rag para hindi makatalisod.

kung exiting na ang walls at ceiling nyo... pwede ka mag lagay ng acoustic wall panel treatment at dun mo padain ang wiring sa side walls naman pwede ka maglagay ng PVC skirting at kung meron na skirting pwede ka gumamit ng  PVC moulding to run the wires. kung ang wires have to cross the door, pwede ka gumamit din PVD mould around the door jamb/architrave and painted it to match the existing color. Sa ceiling pla at ayaw mong sirain ang kesame, add wood or PVC cornice or moulding to run/hide the cables. HTH