hindi master basta yung DHCP IP range mo set sa router (i.e. 192.168.1.100 - 192.168.1.150) and the IP you will manually assign is outside that range (192.168.1.199).
Router restored to factory defaults. I think the cable is good, kasi either way I connect 2 of the computers (wired or not), nakaka connect sya sa internet.
1. On Measy, tried Network->Wired Lan Setup->DHCP (AUTO)->DNS Auto... Testing... Fail...
Looking at Misc->Network Info, eto na set ni Measy..
- IP: 169.254.73.131
- Subnet: 255.255.0.0
- Gateway 0.0.0.0
These steps below are doomed to fail, anyway just to rule out the possibility
1.A tried Network->Wired Lan Setup->DHCP (AUTO)->DNS Manual... set to 0.0.0.0... Testing... Fail...
1.B tried Network->Wired Lan Setup->DHCP (AUTO)->DNS Manual... set to <Provider DNS>... Testing... Fail...
1.A tried Network->Wired Lan Setup->DHCP (AUTO)->DNS Manual... set to 192.168.2.1... Testing... Fail...
Looking at Network info, same lang above, except for the IP values
Router's DHCP range is 192.168.2.2 - 192.168.2.100.. so trying to do a fix ip setup for Measy
2. Network->Wired Lan Setup->Fix IP (Manual)
- IP: 169.254.73.131
- Subnet: 255.255.255.0
- Gateway 192.168.2.1
- DNS 192.168.2.1
di pa rin nakikita sa network. di ko napi-ping yung assigned ip.. tried turning on/off the modem, router, player.. same result.. the built in browser or apps can't even connect to the net..
did I miss anything?