Author Topic: DIY projector screen (Read 97358 times)

Courage · « **Reply #300 on:** Jun 18, 2012 at 04:36 PM »

Quote from: Louie_18 on Jun 18, 2012 at 04:31 PM

Eto brader, manipis na plywood...

Manipis nga at tamang tama kaso problema ko pano ko cut yan into strips of 2" na pantay na pantay..he he he

May nag suggest naman.. Vinyl Rubber Base board kaso it comes into 4" width.. problema to cut it into half na pantay... Dyan ako sumasablay sa Felt paper.. pag cut na pantay na pantay into 2 inches ha ha ha

≧◉◡◉≦xrampage≧◉◡◉≦ · « **Reply #301 on:** Jun 18, 2012 at 04:40 PM »

Quote from: Louie_18 on Jun 18, 2012 at 04:26 PM

+1

Sa Ace Hardware alam ko nagmimix na sila...

Mahal sa Ace kahit na sa ibang store lang sa labas na nagbebenta ng pintura. Sabagay kayang kaya naman ni jason un sa ace.

Quote from: Courage on Jun 18, 2012 at 04:36 PM

Manipis nga at tamang tama kaso problema ko pano ko cut yan into strips of 2" na pantay na pantay..he he he

May nag suggest naman.. Vinyl Rubber Base board kaso it comes into 4" width.. problema to cut it into half na pantay... Dyan ako sumasablay sa Felt paper.. pag cut na pantay na pantay into 2 inches ha ha ha

Gumamit ka na lang ng tape brader. Sure un kasi un ang gamit nila dito sa house nung nag pipintura sila ng door ung mga door knobs may tape ayun safe na safe ung mga door knobs wala pintura.

Nelson de Leon · « **Reply #302 on:** Jun 19, 2012 at 12:33 PM »

Quote from: Courage on Jun 18, 2012 at 04:16 PM

Paano gumawa nang Flat Pure Black na paint? Hahaluin ba yun or may ready mix na na Flat black na paint for wood?

Alam ko may ready mix na nasa lata. Spray paint na flat black.

Courage · « **Reply #303 on:** Jun 19, 2012 at 10:41 PM »

Quote from: Nelson de Leon on Jun 19, 2012 at 12:33 PM

Alam ko may ready mix na nasa lata. Spray paint na flat black.

Thanks sir Nelson, i'll check it out... Natatakot ako mag spray... di ko ma hold steady yung can ha ha ha

Nelson de Leon · « **Reply #304 on:** Jun 20, 2012 at 06:10 AM »

Quote from: Courage on Jun 19, 2012 at 10:41 PM

Thanks sir Nelson, i'll check it out... Natatakot ako mag spray... di ko ma hold steady yung can ha ha ha

No need to have a very firm hand sa spray as long as you cover the other parts properly. Just allow time between sprays and make sure hindi mahangin or maalikabok yun spraying area. You suking pintor can also do it for you.

Courage · « **Reply #305 on:** Jun 20, 2012 at 09:59 AM »

Quote from: Nelson de Leon on Jun 20, 2012 at 06:10 AM

No need to have a very firm hand sa spray as long as you cover the other parts properly. Just allow time between sprays and make sure hindi mahangin or maalikabok yun spraying area. You suking pintor can also do it for you.

I guess i'll have to stay with roller brush.. Planning to remove the border and just roller paint na lang the sides.. Kelangan ko lang talaga eh black na black na FLAT paint...

Di na ako makapag spray kasi naka fix na sa wall yung screen he he he..

Thanks for the suggestion sir Nelson..

R1DVD · « **Reply #306 on:** Jun 20, 2012 at 10:38 AM »

Bakit mo nga pala papalitan yung felt paper border mo? For me, best material ang felt kasi it absorbs the stray light effectively. Dati naghahanap din ako ng flat black enamel pero wala ako makita, panay gloss. Not sure though sa mga expensive brands like Ace. Meron flat black in spray cans pero mahirap gamitin ito kung naka-fix na ang screen mo sa wall? Just buy a long wide ruler at yun gamitin mong guide when you cut the felt paper using cutter blade para uniform ang width at pantay-pantay. Then use double sided tape para idikit sa screen

Courage · « **Reply #307 on:** Jun 20, 2012 at 11:22 AM »

Quote from: R1DVD on Jun 20, 2012 at 10:38 AM

Bakit mo nga pala papalitan yung felt paper border mo? For me, best material ang felt kasi it absorbs the stray light effectively. Dati naghahanap din ako ng flat black enamel pero wala ako makita, panay gloss. Not sure though sa mga expensive brands like Ace. Meron flat black in spray cans pero mahirap gamitin ito kung naka-fix na ang screen mo sa wall? Just buy a long wide ruler at yun gamitin mong guide when you cut the felt paper using cutter blade para uniform ang width at pantay-pantay. Then use double sided tape para idikit sa screen

Bro, i tried cutting it using different rulers and cutting tools.. talagang pumapalya ako sa pag cut.. Hindi ko talaga mapantay from end to end ha ha ha... Kaya yung border ko ngayon may part na may alon, may part na mas maikis ang width etc.. Maganda ang Felt if i can only make it right... he he he

toys4geeks · « **Reply #308 on:** Jun 20, 2012 at 11:25 AM »

suggest ko sana, since mouse ka sanay given your line of work, mouse na may blade joke joke joke

Courage · « **Reply #309 on:** Jun 20, 2012 at 11:28 AM »

Quote from: toys4geeks on Jun 20, 2012 at 11:25 AM

suggest ko sana, since mouse ka sanay given your line of work, mouse na may blade joke joke joke

Ha ha ha ha....langya naman yang suggestion mo ha ha ha....

Magpapatimpla na nga lang ako nang Flat black kung meron man....

Nelson de Leon · « **Reply #310 on:** Jun 20, 2012 at 02:58 PM »

Quote from: toys4geeks on Jun 20, 2012 at 11:25 AM

suggest ko sana, since mouse ka sanay given your line of work, mouse na may blade joke joke joke

Quote from: Courage on Jun 20, 2012 at 11:28 AM

Ha ha ha ha....langya naman yang suggestion mo ha ha ha....

Magpapatimpla na nga lang ako nang Flat black kung meron man....

Tapos kabit mo sa roller na korteng mouse ang handle.

Courage · « **Reply #311 on:** Jun 20, 2012 at 03:38 PM »

Quote from: Nelson de Leon on Jun 20, 2012 at 02:58 PM

Tapos kabit mo sa roller na korteng mouse ang handle.

Ha ha ha.. ang kulet nang suggestions nyo ha ha ha...

ninjababez® · « **Reply #312 on:** Jun 21, 2012 at 08:19 AM »

Quote from: R1DVD on Jun 20, 2012 at 10:38 AM

Bakit mo nga pala papalitan yung felt paper border mo? For me, best material ang felt kasi it absorbs the stray light effectively.

Quote from: Courage on Jun 20, 2012 at 11:22 AM

Bro, i tried cutting it using different rulers and cutting tools.. talagang pumapalya ako sa pag cut.. Hindi ko talaga mapantay from end to end ha ha ha... Kaya yung border ko ngayon may part na may alon, may part na mas maikis ang width etc.. Maganda ang Felt if i can only make it right... he he he

bro Jason tama si R1DVD, best na talaga yung felt, kung di kaya ng powers mo yung pag gawa kay wifey nalang mo pagawa. baka kasi sa anong kadahilanan eh pasmado ang iyong kamay kaya di mo mpantay

Courage · « **Reply #313 on:** Jun 21, 2012 at 09:22 AM »

Quote from: ninjababez® on Jun 21, 2012 at 08:19 AM

bro Jason tama si R1DVD, best na talaga yung felt, kung di kaya ng powers mo yung pag gawa kay wifey nalang mo pagawa. baka kasi sa anong kadahilanan eh pasmado ang iyong kamay kaya di mo mpantay

Ha ha ha... i have a long ruler, if i use the cutter sumasablay pa din ha ha ha.... Pasmado talaga ha ha ha...

Naghuhugas kasi ako nang pinggan pagkatapos mamalantsa he he he

Courage · « **Reply #314 on:** Jun 27, 2012 at 04:00 PM »

Bought me a Boysen Quick Dry Enamel 691 Flat black... Will remove the uneven Felt paper border and will just paint na lang.... he he he...

R1DVD · « **Reply #315 on:** Jun 27, 2012 at 05:35 PM »

Quote from: Courage on Jun 27, 2012 at 04:00 PM

Bought me a Boysen Quick Dry Enamel 691 Flat black... Will remove the uneven Felt paper border and will just paint na lang.... he he he...

Just put masking tape on the area you don't want painted. Remember to remove the tape before the paint totally dries up or else paghila mo ng tape baka sumama yung black paint mo. Good luck

Courage · « **Reply #316 on:** Jun 27, 2012 at 05:44 PM »

Quote from: R1DVD on Jun 27, 2012 at 05:35 PM

Just put masking tape on the area you don't want painted. Remember to remove the tape before the paint totally dries up or else paghila mo ng tape baka sumama yung black paint mo. Good luck

Thanks for the tip bro he he he... Kabado na naman ako nyan.. ayaw ko nang mag pintura ulit nang buong screen pag nagkamali ha ha ha...

R1DVD · « **Reply #317 on:** Jun 27, 2012 at 07:54 PM »

Para sigurado, use a wide masking tape and narrow roller brush. Good luck!

toys4geeks · « **Reply #318 on:** Jun 27, 2012 at 08:39 PM »

Quote from: Courage on Jun 27, 2012 at 05:44 PM

Thanks for the tip bro he he he... Kabado na naman ako nyan.. ayaw ko nang mag pintura ulit nang buong screen pag nagkamali ha ha ha...

Wala bang undo button (parang sa ms paint) heheheh

Courage · « **Reply #319 on:** Jun 28, 2012 at 01:53 AM »

Quote from: toys4geeks on Jun 27, 2012 at 08:39 PM

Wala bang undo button (parang sa ms paint) heheheh

Ha ha ha.... sana ngna meron ha ha ha..

Courage · « **Reply #320 on:** Jul 09, 2012 at 11:05 PM »

Anybody here made an adjustable black borders, so when playing a source with black borders on top and bottom you can simply adjust it to that level and cover the bars with no image? I'm thinking of making one for superior contrast. i just still don't know what materials to use and how to make it adjustable he he he

Nelson de Leon · « **Reply #321 on:** Jul 10, 2012 at 06:32 AM »

Quote from: Courage on Jul 09, 2012 at 11:05 PM

Anybody here made an adjustable black borders, so when playing a source with black borders on top and bottom you can simply adjust it to that level and cover the bars with no image? I'm thinking of making one for superior contrast. i just still don't know what materials to use and how to make it adjustable he he he

Baka masmadali pang i-adjust mo na lang yun zoom ng PJ.

Courage · « **Reply #322 on:** Jul 10, 2012 at 07:32 AM »

Quote from: Nelson de Leon on Jul 10, 2012 at 06:32 AM

Baka masmadali pang i-adjust mo na lang yun zoom ng PJ.

If i do that, may image na mawawala sa screen since my screen is 16:9.. eh di ba yung movies na may black bars eh 2:78 or 1.85 or something... whatever they are called he he he

ninjababez® · « **Reply #323 on:** Jul 10, 2012 at 07:39 AM »

Quote from: Courage on Jul 10, 2012 at 07:32 AM

If i do that, may image na mawawala sa screen since my screen is 16:9.. eh di ba yung movies na may black bars eh 2:78 or 1.85 or something... whatever they are called he he he

anong player gamit mo bro? kung htpc bro madali lang yan. depende sa player pero lahat kaya yan gusto mo gawin

trinity1123 · « **Reply #324 on:** Jul 10, 2012 at 07:42 AM »

Quote from: Courage on Jul 10, 2012 at 07:32 AM

If i do that, may image na mawawala sa screen since my screen is 16:9.. eh di ba yung movies na may black bars eh 2:78 or 1.85 or something... whatever they are called he he he

Kaya nga may selector projector ng screen size di ba?auto,16:9 etc hehehe

Mawawala sa wide format,yung DIY screen mo kung de-galaw yung border...Para sa akin di ko type yung ganun,hehehe,nasa format kasi nung source mong movie yun e,sa akin di naman nagbabago ang image quality kahit anong size pa i set e...Di kaya kulang sa timpla yung PJ mo?

markcrenz · « **Reply #325 on:** Jul 10, 2012 at 08:36 AM »

Quote from: Courage on Jul 09, 2012 at 11:05 PM

Anybody here made an adjustable black borders, so when playing a source with black borders on top and bottom you can simply adjust it to that level and cover the bars with no image? I'm thinking of making one for superior contrast. i just still don't know what materials to use and how to make it adjustable he he he

i get what you mean bro, para mawala yung ~~black~~dark gray bars when watching very wide formats. i was planning to design adjustable black covers for the top and bottom edges kaso nasira naman pj ko.

Courage · « **Reply #326 on:** Jul 10, 2012 at 09:25 AM »

Quote from: markcrenz on Jul 10, 2012 at 08:36 AM

i get what you mean bro, para mawala yung ~~black~~dark gray bars when watching very wide formats. i was planning to design adjustable black covers for the top and bottom edges kaso nasira naman pj ko.

Yes yes yes.. thats what i'm talking about he he he... Yan din iniisip ko... When playing a very wide format movie.. hindi kasi na fifill yung 16:9 na screen eh...Eh ang dami pa namang movies na ganito yung format... I tried pmasking tape yung mga natira kong Black felt and mas maganda sya kasi pag patay na ilaw totally dark na yung sides nang displayed image.... the result is really awesome.. thats why naisip ko yung removable na top and bottom borders or adjustable.. I saw a post somewhere here na yung screen nya may adjustable borders di ko lang makita he he he

Courage · « **Reply #327 on:** Jul 10, 2012 at 09:26 AM »

Quote from: trinity1123 on Jul 10, 2012 at 07:42 AM

Kaya nga may selector projector ng screen size di ba?auto,16:9 etc hehehe

Mawawala sa wide format,yung DIY screen mo kung de-galaw yung border...Para sa akin di ko type yung ganun,hehehe,nasa format kasi nung source mong movie yun e,sa akin di naman nagbabago ang image quality kahit anong size pa i set e...Di kaya kulang sa timpla yung PJ mo?

Sir, you totally don't understand what I'm trying to accomplish here

My_einjels · « **Reply #328 on:** Jul 10, 2012 at 09:54 AM »

Quote from: Courage on Jul 09, 2012 at 11:05 PM

Anybody here made an adjustable black borders, so when playing a source with black borders on top and bottom you can simply adjust it to that level and cover the bars with no image? I'm thinking of making one for superior contrast. i just still don't know what materials to use and how to make it adjustable he he he

sir projector masking system po yata tawag dun

like this po yata

http://www.youtube.com/watch?v=vGZjM-YdLGg

Courage · « **Reply #329 on:** Jul 10, 2012 at 10:00 AM »

Quote from: ninjababez® on Jul 10, 2012 at 07:39 AM

anong player gamit mo bro? kung htpc bro madali lang yan. depende sa player pero lahat kaya yan gusto mo gawin

Bro, i know i can zoom on the image using the Player's zoom but i loose some left and right area of the image... also digital zoom degrades PQ, maybe not noticeable pero you do loose details he he he...