Author Topic: DENON HDMI 1.3 Receivers  (Read 10516 times)

0 Members and 1 Guest are viewing this topic.

Offline aligonzales

  • Trade Count: (+13)
  • Collector
  • **
  • Posts: 252
  • Liked:
  • Likes Given: 0
DENON HDMI 1.3 Receivers
« on: Apr 12, 2007 at 04:23 PM »
Taken from hometheaterblog.com.... :)

Follow Up: Denon’s HDMI 1.3 Receivers

Back in November Audio DesignLine unveiled new window some of the first details surrounding (pun intended) Denon’s forthcoming A/V receivers with HDMI 1.3 support, we now have a few more tentative details about the new ‘08’ series of receivers from Denon. It appears as if the receivers will be rolled out in two waves, the first wave in July will include the AVR-4308ci and AVR-3808ci with the AVR-1508, AVR-1708 and AVR-2808 following in September.

Again these are tentative details but should remain accurate baring any last minute launch snafus. The AVR-4308ci ($2,499) will sport four HDMI 1.3 inputs with two parallel HDMI outputs, support for internal Dolby TrueHD and DTS-HD audio decoding over HDMI, auto lip-sync correction, 8-position Audyssey MultEQ, Ethernet & Wi-Fi capabilities for internet radio and presumably support for Windows Media PlaysForSure new window functionality. The 4308 will also support second zone component video output and digital to analog conversion for multi-zone applications.

The AVR-3808ci (also tentatively expected in July) will retail for $1,599 and features four HDMI 1.3 inputs, support for internal Dolby TrueHD and DTS-HD audio decoding over HDMI, auto lip-sync correction, 6-position Audyssey MultEQ, Ethernet connectivity and again presumably support for Windows Media PlaysForSure. The 3808ci also supports digital to analog conversion for multi-zone applications. Both the AVR-4308ci and AVR-3808ci are said to have had their on-screen graphical interfaces redesigned as well.

The second wave of receivers in September will include the AVR-1508, AVR-1708 and AVR-2808 (no pricing as yet). The AVR-1508 AVR-1708 will support HDMI 1.3 but ‘switching mode’ only, in a nutshell that means that they will support HDMI audio, ‘Deep Color’ and 1080p pass-through but not internal Dolby TrueHD and DTS-HD processing, although you can still achieve lossless audio from Blu-ray and HD DVD output as PCM from the players over HDMI.

The AVR-2808’s HDMI 1.3 path is said to offer the same functionality as the AVR-4308ci and AVR-3808ci, i.e. internal Dolby TrueHD and DTS-HD decoding as well as auto lip-sync correction. Good stuff indeed, I can’t wait to get my hands on the AVR-3808ci.
« Last Edit: Apr 12, 2007 at 04:29 PM by aligonzales »

Offline MAtZTER

  • Trade Count: (0)
  • PinoyDVD Legend
  • *****
  • Posts: 4,638
  • More POWER to your HT! literally ...
  • Liked:
  • Likes Given: 0
Re: DENON HDMI 1.3 Receivers
« Reply #1 on: Apr 12, 2007 at 04:34 PM »
They are coming... 8)

Offline Platinum

  • Trade Count: (+185)
  • Collector
  • **
  • Posts: 393
  • Happy with what I have, working for what I want...
  • Liked:
  • Likes Given: 5
Re: DENON HDMI 1.3 Receivers
« Reply #2 on: Apr 12, 2007 at 04:38 PM »
They are coming... 8)


SARS attack coming.... ;D
Enjoy what you have!

Offline bono vox

  • Trade Count: (+63)
  • DVD Addict
  • ***
  • Posts: 658
  • newbie
  • Liked:
  • Likes Given: 0
Re: DENON HDMI 1.3 Receivers
« Reply #3 on: Apr 12, 2007 at 04:39 PM »
isip... isip????  ;D

Offline Munskie

  • Trade Count: (+7)
  • PinoyDVD Legend
  • *****
  • Posts: 5,142
  • HighDef Enthusiast
  • Liked:
  • Likes Given: 0
Re: DENON HDMI 1.3 Receivers
« Reply #4 on: Apr 12, 2007 at 04:51 PM »
ayan napo sila.... ;D ;D  mura ang onkyo sa denon....but I need pre-outs.......maybe the cheapest one with internal decoding of dolby trueHD and DTS MA and with pre-outs, will be the most viable proposition.....

Offline MAtZTER

  • Trade Count: (0)
  • PinoyDVD Legend
  • *****
  • Posts: 4,638
  • More POWER to your HT! literally ...
  • Liked:
  • Likes Given: 0
Re: DENON HDMI 1.3 Receivers
« Reply #5 on: Apr 12, 2007 at 05:29 PM »
ayan napo sila.... ;D ;D  mura ang onkyo sa denon....but I need pre-outs.......maybe the cheapest one with internal decoding of dolby trueHD and DTS MA and with pre-outs, will be the most viable proposition.....

Ok din yang option, para try mo naman Onkyo. Bagay din daw yan sa B&W's mo.

Since naka power amps ka na, your options are not limited!  ;) No need to get the highest model anymore since the power amps will pack the punch.
« Last Edit: Apr 12, 2007 at 06:08 PM by MAtZTER »

Offline aligonzales

  • Trade Count: (+13)
  • Collector
  • **
  • Posts: 252
  • Liked:
  • Likes Given: 0
Re: DENON HDMI 1.3 Receivers
« Reply #6 on: Apr 13, 2007 at 12:42 AM »
Check this out...

DENON SEPARATES!

Taken from Audioholics.com...

AVP Processor

The AVP Processor sports virtually all of the features currently found on the AVR-5805CI with some added bonuses including:

    * HDMI 1.3
    * Analog to HDMI Conversion and upscaling to 1080p
    * Realta HQV Processing
    * Dolby TruHD and DTS HD decoding
    * Multi Channel Zone 2 Output for dual surround zones
    * Zone 4 Digital Audio
    * Simply HD Certified silicon image approves connectivity and operability
    * Remote maintenance program
    * Wireless audio streaming with WMA support
    * Balanced outputs

10 Channel Multi Channel Amplifier

    * Full 10 channel amplifier design
    * Full channel assignment configurability
    * Specified Power: 150wpc x 10 or 300 x 5 (bridgeable)
    * In Bridge mode, the amp is fully stable down to 4 ohm loads
    * Balanced inputs
    * VU Front Panel Power Meters
    * Handles on back, 20 amp
    * 10CH
    * UL Certified
    * 140lbs

Based on our experience past Denon flagship receiver models, especially the AVR-5805, Denon's new A/V Separates solution has the potential to re-define the market based on performance and feature firsts to the marketplace.

Pricing has not officially been announced but we'd expect it to be less than a small import car.


Watch the video...  http://www.audioholics.com/news/trade-show-coverage/2007-consumer-electronics-show-ces/denon-electronics-2-new-separates/videoView
« Last Edit: Apr 13, 2007 at 12:43 AM by aligonzales »

Offline mike c

  • Trade Count: (+154)
  • PinoyDVD Legend
  • *****
  • Posts: 3,876
  • Subwoofer Freak
  • Liked:
  • Likes Given: 36
Re: DENON HDMI 1.3 Receivers
« Reply #7 on: Apr 13, 2007 at 08:01 AM »
kelan kaya dadating to sa RP?
www.mkcinternational.com
Power Sound Audio

Offline MAtZTER

  • Trade Count: (0)
  • PinoyDVD Legend
  • *****
  • Posts: 4,638
  • More POWER to your HT! literally ...
  • Liked:
  • Likes Given: 0
Re: DENON HDMI 1.3 Receivers
« Reply #8 on: May 19, 2007 at 03:06 PM »
Ang mahal lang kasi ng Denon dito sa atin, and w/ the increase in all AVR prices cuz of HDMI, lalo pang nagmahal  :(

Offline mher70

  • Trade Count: (+8)
  • Collector
  • **
  • Posts: 120
  • Liked:
  • Likes Given: 0
Re: DENON HDMI 1.3 Receivers
« Reply #9 on: May 28, 2007 at 07:56 PM »
mga sir tanong lang po ako balak ko po mag up grade ng avr ?? may previous tx-sr600 onkyo b&w602s3 .. ano po maganda avr na match sa speaker ko ??sa hongkong po ba may mabibilhan na mura at saan po doon 1st time ko lang po pumuta doon i need your suggestion mga sir ty po reply po plsss 

Offline [r]ichkri3g

  • Trade Count: (0)
  • Collector
  • **
  • Posts: 51
  • Blu Boy
  • Liked:
  • Likes Given: 0
Re: DENON HDMI 1.3 Receivers
« Reply #10 on: Jun 06, 2007 at 02:05 PM »
Denon AVP-A1HD














« Last Edit: Jun 06, 2007 at 02:06 PM by [r]ichkri3g »

Offline danrd

  • Trade Count: (+25)
  • DVD Guru
  • ****
  • Posts: 1,194
  • Do it now while you still can!
  • Liked:
  • Likes Given: 0
Re: DENON HDMI 1.3 Receivers
« Reply #11 on: Jun 06, 2007 at 02:07 PM »
Wow waa wee waa!!  :o :o :o Is that a portion of an airplane cockpit?  ;D ;D   Bangis !!

Offline [r]ichkri3g

  • Trade Count: (0)
  • Collector
  • **
  • Posts: 51
  • Blu Boy
  • Liked:
  • Likes Given: 0
Re: DENON HDMI 1.3 Receivers
« Reply #12 on: Jun 06, 2007 at 02:10 PM »
Denon AVR-4308






Offline Munskie

  • Trade Count: (+7)
  • PinoyDVD Legend
  • *****
  • Posts: 5,142
  • HighDef Enthusiast
  • Liked:
  • Likes Given: 0
Re: DENON HDMI 1.3 Receivers
« Reply #13 on: Jun 07, 2007 at 08:48 AM »
Denon AVR-4308






I cringe when I see the price of a 4xxx series of Denon.........hehehe

Offline MAtZTER

  • Trade Count: (0)
  • PinoyDVD Legend
  • *****
  • Posts: 4,638
  • More POWER to your HT! literally ...
  • Liked:
  • Likes Given: 0
Re: DENON HDMI 1.3 Receivers
« Reply #14 on: Jun 07, 2007 at 11:45 AM »
I cringe when I see the price of a 4xxx series of Denon.........hehehe

Me too,the prices make me cringe.  ;D
« Last Edit: Jul 13, 2007 at 03:32 PM by MAtZTER »

Offline [r]ichkri3g

  • Trade Count: (0)
  • Collector
  • **
  • Posts: 51
  • Blu Boy
  • Liked:
  • Likes Given: 0
Re: DENON HDMI 1.3 Receivers
« Reply #15 on: Jul 12, 2007 at 11:30 PM »
Denon AVR-2808ci







DETAILS ARE TENTATIVE

• Available in Black & Silver
• Video conversion to HDMI v1.3a and 1080p upscaling
• High quality I/P conversion for HDMI
• Dolby TrueHD and DTS-HD decoding
• DDSC-Digital featuring Analogue Devices HammerHead SHARC 32 bit floating point DSP processor
• Audyssey MultEQ XT Auto-Setup and Room EQ function with microphone supplied
• 7 Channels equal power amplifier section
• 110 watts per channel (8 ohms, 20 Hz-20 kHz, <.05%THD)
• ALPHA 24 Processing (AL24) on all channels
• Adjustable High and Low Pass Crossover (40/60/80/100/120/150/200/250Hz)
• 12bit/216MHz Video DAC
• "Compressed Audio Restorer" for higher quality playback of MP3/AAC via the optional iPod dock
• Assignable Component Video inputs (100MHz Bandwidth), with On-Screen Display
• 7.1 external wide bandwidth (100 kHz) inputs for multi-channel formats, such as DVD-Audio and Super Audio CD
• Digitally regulated volume control with .5dB increment adjustments and step range of -80 to +18dB
• Audio Delay adjustment to match audio signals with video signals (0-200ms)
• Built-in RDS AM/FM tuner
• 2 Multizone functionality with Discrete Power, Source Select and Volume control for each zone
• Power Amplifier Assign function, lets you assign 2 of the 7 amp channels to drive Zone 2 speakers directly
• 2 12V Trigger
• IR in/out terminals
• Learning remote
• Optional ASD-1R iPod dock available
• Full System Setup/Parameter control on front panel, with feedback on front panel display (Monitor is not needed for setup)

Power Output:  7x 110W (8 ohms, 20Hz-20kHz, 0.08% THD)
Frequency Response: 10Hz - 100kHz (+1, -3 dB)
Tone controls: Treble: ±12 dB at 10 kHz | Bass: ±12 dB at 100 Hz
Power Supply:    AC 230V, 50 Hz
Input sensitivity/Impedance:    200 mV/47 kohms
Dimensions: Width 434mm | Height 171mm | Depth 420mm | Weight 14kg

Offline aligonzales

  • Trade Count: (+13)
  • Collector
  • **
  • Posts: 252
  • Liked:
  • Likes Given: 0
Re: DENON HDMI 1.3 Receivers
« Reply #16 on: Nov 12, 2007 at 02:39 AM »
THEY ARE HERE!  ;D

Denon 08 Series receivers. Available na locally!

Offline samboy

  • Trade Count: (0)
  • Collector
  • **
  • Posts: 57
  • I'm a llama!
  • Liked:
  • Likes Given: 0
Re: DENON HDMI 1.3 Receivers
« Reply #17 on: Nov 12, 2007 at 05:19 AM »
mga sir, saan shops pwee mag audition ng denon?

Offline aligonzales

  • Trade Count: (+13)
  • Collector
  • **
  • Posts: 252
  • Liked:
  • Likes Given: 0
Re: DENON HDMI 1.3 Receivers
« Reply #18 on: Nov 12, 2007 at 09:22 AM »
Architectural Audio sells Denon receivers. Try calling them first. 8116715.

Offline redhorse

  • Trade Count: (0)
  • Apprentice
  • *
  • Posts: 15
  • Liked:
  • Likes Given: 0
Re: DENON HDMI 1.3 Receivers
« Reply #19 on: Nov 14, 2007 at 04:03 PM »
phone number busy!

will try my luck again..

Offline 5Speed

  • Trade Count: (0)
  • Collector
  • **
  • Posts: 398
  • It's me..
  • Liked:
  • Likes Given: 0
Re: DENON HDMI 1.3 Receivers
« Reply #20 on: Nov 14, 2007 at 05:51 PM »
Denon AVR-2808ci







DETAILS ARE TENTATIVE

• Available in Black & Silver
• Video conversion to HDMI v1.3a and 1080p upscaling
• High quality I/P conversion for HDMI
• Dolby TrueHD and DTS-HD decoding
• DDSC-Digital featuring Analogue Devices HammerHead SHARC 32 bit floating point DSP processor
• Audyssey MultEQ XT Auto-Setup and Room EQ function with microphone supplied
• 7 Channels equal power amplifier section
• 110 watts per channel (8 ohms, 20 Hz-20 kHz, <.05%THD)
• ALPHA 24 Processing (AL24) on all channels
• Adjustable High and Low Pass Crossover (40/60/80/100/120/150/200/250Hz)
• 12bit/216MHz Video DAC
• "Compressed Audio Restorer" for higher quality playback of MP3/AAC via the optional iPod dock
• Assignable Component Video inputs (100MHz Bandwidth), with On-Screen Display
• 7.1 external wide bandwidth (100 kHz) inputs for multi-channel formats, such as DVD-Audio and Super Audio CD
• Digitally regulated volume control with .5dB increment adjustments and step range of -80 to +18dB
• Audio Delay adjustment to match audio signals with video signals (0-200ms)
• Built-in RDS AM/FM tuner
• 2 Multizone functionality with Discrete Power, Source Select and Volume control for each zone
• Power Amplifier Assign function, lets you assign 2 of the 7 amp channels to drive Zone 2 speakers directly
• 2 12V Trigger
• IR in/out terminals
• Learning remote
• Optional ASD-1R iPod dock available
• Full System Setup/Parameter control on front panel, with feedback on front panel display (Monitor is not needed for setup)

Power Output:  7x 110W (8 ohms, 20Hz-20kHz, 0.08% THD)
Frequency Response: 10Hz - 100kHz (+1, -3 dB)
Tone controls: Treble: ±12 dB at 10 kHz | Bass: ±12 dB at 100 Hz
Power Supply:    AC 230V, 50 Hz
Input sensitivity/Impedance:    200 mV/47 kohms
Dimensions: Width 434mm | Height 171mm | Depth 420mm | Weight 14kg

Saw and tried this in one of the shops in here last time....very very nice AVR...... :o

Offline redhorse

  • Trade Count: (0)
  • Apprentice
  • *
  • Posts: 15
  • Liked:
  • Likes Given: 0
Re: DENON HDMI 1.3 Receivers
« Reply #21 on: Nov 15, 2007 at 09:56 AM »
hi 5speed,

pa-post naman or pm price ng denon 2808 dyan sa hongkong..

worth it bitbitin yan? thanks..

Offline 5Speed

  • Trade Count: (0)
  • Collector
  • **
  • Posts: 398
  • It's me..
  • Liked:
  • Likes Given: 0
Re: DENON HDMI 1.3 Receivers
« Reply #22 on: Nov 15, 2007 at 10:42 AM »
hi 5speed,

pa-post naman or pm price ng denon 2808 dyan sa hongkong..

worth it bitbitin yan? thanks..

okay...will check...coz the last time that i've been on the shop, they still dont have the pricing....they are just testing their newly arrived merchandise, its not even on the display area yet......IMO, it is worth na bitbitin ito pauwi dyan sa atin....hehehehe

Offline threadlock

  • Trade Count: (+12)
  • DVD Addict
  • ***
  • Posts: 584
  • Liked:
  • Likes Given: 0
Re: DENON HDMI 1.3 Receivers
« Reply #23 on: Nov 15, 2007 at 11:58 AM »
Saw and tried this in one of the shops in here last time....very very nice AVR...... :o

have you noticed any issues like dropping of HDMI signal, popping/clicking sound on change of sources? Does it run hot?
I guess the price of this is similar to Onkyo 805 but if this do not have the issues like that of onkyo then this is a better buy.
With too many options you could end up not choosing one

Offline mike c

  • Trade Count: (+154)
  • PinoyDVD Legend
  • *****
  • Posts: 3,876
  • Subwoofer Freak
  • Liked:
  • Likes Given: 36
Re: DENON HDMI 1.3 Receivers
« Reply #24 on: Nov 15, 2007 at 01:05 PM »
FYI lang

the models we get here are NOT CI versions ... they have fewer switched outlets, lower models probably have no 12v triggers

and then unlike the 07 series na 1907 lang may preout na
preout sa 08 series I think starts at 2808
www.mkcinternational.com
Power Sound Audio

Offline redhorse

  • Trade Count: (0)
  • Apprentice
  • *
  • Posts: 15
  • Liked:
  • Likes Given: 0
Re: DENON HDMI 1.3 Receivers
« Reply #25 on: Nov 15, 2007 at 09:56 PM »
@5speed,

thanks.. will wait for d reply

Offline 5Speed

  • Trade Count: (0)
  • Collector
  • **
  • Posts: 398
  • It's me..
  • Liked:
  • Likes Given: 0
Re: DENON HDMI 1.3 Receivers
« Reply #26 on: Nov 16, 2007 at 10:17 AM »
have you noticed any issues like dropping of HDMI signal, popping/clicking sound on change of sources? Does it run hot?
I guess the price of this is similar to Onkyo 805 but if this do not have the issues like that of onkyo then this is a better buy.

when I saw it in the show room, they are just testing it for pure audio....in fact, it is just out of the box at that time, they say they will try a series of test first before they officially put it side by side with other new receivers on their shop. :)  they hooked it up with B&W CM1.....sweet sound...:)

Offline 5Speed

  • Trade Count: (0)
  • Collector
  • **
  • Posts: 398
  • It's me..
  • Liked:
  • Likes Given: 0
Re: DENON HDMI 1.3 Receivers
« Reply #27 on: Nov 16, 2007 at 10:19 AM »
@5speed,

thanks.. will wait for d reply

redhorse,

I will try to get you the price....basta nagawi ako don sa shop....malayo kasi yon sa workplace ko.....hehehehe

Offline lakambini

  • Trade Count: (+6)
  • DVD Addict
  • ***
  • Posts: 904
  • I AM
  • Liked:
  • Likes Given: 1
Re: DENON HDMI 1.3 Receivers
« Reply #28 on: Nov 16, 2007 at 02:09 PM »
mike c

i was already keen on acquiring a new denon 1908, mabuti na lang na-double check ko sa shop at tama ka nga na wala siyang preouts, ok na sana lahat, haaaaayyyyy, so disheartening naman, got to look for another.

Offline mike c

  • Trade Count: (+154)
  • PinoyDVD Legend
  • *****
  • Posts: 3,876
  • Subwoofer Freak
  • Liked:
  • Likes Given: 36
Re: DENON HDMI 1.3 Receivers
« Reply #29 on: Nov 16, 2007 at 03:16 PM »
mike c

i was already keen on acquiring a new denon 1908, mabuti na lang na-double check ko sa shop at tama ka nga na wala siyang preouts, ok na sana lahat, haaaaayyyyy, so disheartening naman, got to look for another.

good to have helped someone :)  gulat din ako nung hindi ko makita pre-outs sa pics ... sa denon HK website ako tumingin.

nung bumili kasi ako ng 2307 ... di ko alam na hindi CI, so walang 12v trigger.

pero wala pa naman player na nakaka output ng DTS-HD, so wala pang benefit sa atin yung HDMI 1.3.  the 07 series na HDMI 1.1 will output the same high res audio just like the new 08
« Last Edit: Nov 16, 2007 at 03:16 PM by mike c »
www.mkcinternational.com
Power Sound Audio